View Full Version : YBOOST new PB!!!
YBOOST
16-10-2008, 02:47 PM
Went out to WSID for 2nd time since K swap still with toyo street tires and standard suspension.
The car weighed in at 1033.5kg without driver.
It was a good night, all up i got 8 runs!
Launching at 2500rpm i kinda got 1st gear worked out with little bit of wheelspin but 2nd gear is completely no traction, Flat shifting 3rd, 4th and 5th gear i ran a best time 12.907 @ 111.23mph with 1.973 60 foot.
The other runs were all around 13.0 - 13.2.
Hopefully next time i will have good suspension and SLICKS!
2MPRSS
16-10-2008, 03:01 PM
hmmmm niiiceee this k20 engine?
YBOOST
16-10-2008, 03:14 PM
yeah, best upgrade!
ALLMTR
16-10-2008, 03:32 PM
Well done. Who did the conversion?
mr_vtec
16-10-2008, 04:19 PM
thats actually one crazy 60ft for street tyres man..
people do that on semis lol.. even drag radials..
xtercii
16-10-2008, 07:30 PM
very nice, what weight reduction if any have you done?
trism
16-10-2008, 08:58 PM
very nice, what weight reduction if any have you done?
stripped out rear i belive
YBOOST
16-10-2008, 08:59 PM
Well done. Who did the conversion?
JDM Yard put it in. Well done boys!!!
YBOOST
16-10-2008, 09:01 PM
stripped out rear i belive
yeah driver seat only.
BADHBT
16-10-2008, 09:16 PM
JDM Yard put it in. Well done boys!!!
:wave::wave::wave::wave::wave:
IEVAQ8
16-10-2008, 09:20 PM
very nice times...............
markoJEK1
16-10-2008, 10:04 PM
good work , quick outing since your first haha, cant beat been keen
GSi_PSi
17-10-2008, 12:14 AM
thats nice times.. makes me wonder wat times k24 conversion would make in dc2?>
jords
17-10-2008, 02:40 PM
is that a stock k20 with I/H/E ?
or are there any other goodies inside?
congrats on the PB.
delsol9000rpms
17-10-2008, 02:54 PM
from what i know I/H/E+ IM &TB tuned with a KPRO... internally stock jdm k20a... if im wrong the owner can correct me
[ricer]
17-10-2008, 02:58 PM
good work man!
YBOOST
17-10-2008, 03:15 PM
from what i know I/H/E+ IM &TB tuned with a KPRO... internally stock jdm k20a... if im wrong the owner can correct me
sounds like you done ur research. thats all the mods :thumbsup:
DNYALL
17-10-2008, 05:29 PM
Nice work man!! K20a swap is the bomb!!
ALLMTR
17-10-2008, 07:13 PM
I disagree on both counts
I disagree on both counts
:thumbsup: every single weight reduction counts. Been there , done that.
I used to get stuck with 12 sec pass . Weight reduction help alot , do it all out not just taking seat and trims out.
ALLMTR
17-10-2008, 10:35 PM
Yeah unless you are after every last tenth, then it is hardly worth it. It would be really interesting to see what a K motor would do in a light chassis...
Yeah unless you are after every last tenth, then it is hardly worth it. It would be really interesting to see what a K motor would do in a light chassis...
K motor in a light chasis goes real quick , just like G&J AH civic
ALLMTR
17-10-2008, 11:13 PM
Nah I mean really light
[ricer]
17-10-2008, 11:16 PM
some one built a clubman kinda car here with a k24... track down the thread
Nah I mean really light
get someone to run their ariel atom :)
delsol9000rpms
18-10-2008, 12:35 PM
sounds like you done ur research. thats all the mods :thumbsup:
lol ye you told me in the pits the first night yu ran... and plus you had your engine bay open so i had a peak..
mr_vtec
08-11-2008, 10:21 PM
Hahah guys
i finally meet the owner today very nice guy.!!
Just a heads up!! We will see a really really low 12s pass from this car very soon..:)
good luck dam..
Hahah guys
i finally meet the owner today very nice guy.!!
Just a heads up!! We will see a really really low 12s pass from this car very soon..:)
good luck dam..
low 12s should be doable :thumbsup:
Q_ball
09-11-2008, 12:18 AM
Well done on a fantastic pb and 60ft... most impressive!!
fatboyz39
09-11-2008, 08:32 AM
k24 setup?
k24 setup?
nah
He will try full slicks
YBOOST
28-01-2009, 10:30 PM
I finally got to run with full slicks tonight at WSID.
On my last run of the night i got a 12.77 @ 104mph with 1.87 sixty foot for a new PB!
I had launch control set at 5500rpm. My first few runs i couldnt get traction on take off so i took off with less rpm. As the night went on the car was gripping heaps better. Take off at almost full acceleration but still bogging down. Need to raise launch control and hopefully get a 1.7 sixty foot! 12.6 is the next target...
mr_vtec
28-01-2009, 10:49 PM
man i can tell you all they need is a bigggggggggggggggggggggggggggggggg burn out and they will get you 1.714 60ft like i did with out traction bars or nuffin..
good luck next outing..
I finally got to run with full slicks tonight at WSID.
On my last run of the night i got a 12.77 @ 104mph with 1.87 sixty foot for a new PB!
I had launch control set at 5500rpm. My first few runs i couldnt get traction on take off so i took off with less rpm. As the night went on the car was gripping heaps better. Take off at almost full acceleration but still bogging down. Need to raise launch control and hopefully get a 1.7 sixty foot! 12.6 is the next target...
Good to see you again Damo
More RPM off the line for sure.
Congrats on NEW PB !
Benson
28-01-2009, 11:57 PM
Congrats on pb
how come you lost so much mph?
BADHBT
29-01-2009, 11:38 AM
Congrats Damo,
1.6 60ft is doable :)
YBOOST
29-01-2009, 03:13 PM
Congrats on pb
how come you lost so much mph?
thanks mate.
i think when you launch well with slicks you lose mph but get better ETs. i think if you spin off the line you get a higher rpm.
beeza
29-01-2009, 05:16 PM
I finally got to run with full slicks tonight at WSID.
On my last run of the night i got a 12.77 @ 104mph with 1.87 sixty foot for a new PB!
I had launch control set at 5500rpm. My first few runs i couldnt get traction on take off so i took off with less rpm. As the night went on the car was gripping heaps better. Take off at almost full acceleration but still bogging down. Need to raise launch control and hopefully get a 1.7 sixty foot! 12.6 is the next target...
Great times!
Why do you think the car is bogging?
mr_vtec
29-01-2009, 05:24 PM
not enough revs from the sounds of things..
grumpy rooster
29-01-2009, 05:36 PM
Any car will run less mph when it gets a better 60ft. Its just the way it works.
Well done on the time and nice to meet you. More revs everywhere and mid 12's will be your friend. :)
YBOOST
29-01-2009, 06:28 PM
yeah needs more revs on launch control.
good meetin you grumpy!
jdmlvn
29-01-2009, 06:37 PM
very impressive, any pics of ur car on the strip?
beeza
29-01-2009, 07:01 PM
yeah needs more revs on launch control.
good meetin you grumpy!
Gotcha :thumbsup:
YBOOST
30-01-2009, 11:17 AM
this is the 12.77 run
http://www.youtube.com/watch?v=WLPTM5wZvDg
sounds like a bit of bogging at the start
whats launch control sitting on ? and psi in the tyres ??
sounds like a bit of bogging at the start
whats launch control sitting on ? and psi in the tyres ??
5500 rpm
around 11 - 12 psi on the slicks
rayb3na_
30-01-2009, 01:28 PM
slicks fitted to like itr rims? or 13inch welds?
slicks fitted to like itr rims? or 13inch welds?
stock itr 15 inch with slicks
beeza
30-01-2009, 03:15 PM
Very Nice!
DR HONDA
30-01-2009, 06:48 PM
Well done good for 12.5:thumbsup:. Will be quickest DC2R N/A soon.
YBOOST
30-01-2009, 08:43 PM
Well done good for 12.5:thumbsup:. Will be quickest DC2R N/A soon.
whats the quickest time?
whats the quickest time?
12.7
BADHBT dc2
jdmlvn
30-01-2009, 10:15 PM
12.7
BADHBT dc2
does badhbt even exist anymore?
Limbo
31-01-2009, 04:23 AM
yeah but its not NA anymore
BADHBT
05-02-2009, 08:00 PM
yeah but its not NA anymore
says who?
damo 12.5 you can do it i had that feeling that my next run would be a 12.5 but then broke a shaft.. so i packed up and left never been back
you can do it!
barefootbonzai
06-02-2009, 09:11 AM
says who?
what would you know. :wave:
YBOOST
07-02-2009, 03:00 PM
says who?
damo 12.5 you can do it i had that feeling that my next run would be a 12.5 but then broke a shaft.. so i packed up and left never been back
you can do it!
Ive been thinking about taking off launch control, i reckon i can get a better 60 foot but just gotta find that perfect RPM. then hopefully 12.5s
SPL_K
07-02-2009, 03:42 PM
nice times damo...! when are you gonna bring your car down to wakefield? :D
fatboyz39
08-02-2009, 07:49 PM
Nice work. Very fast.
mr180sx
09-02-2009, 09:50 AM
says who?
damo 12.5 you can do it i had that feeling that my next run would be a 12.5 but then broke a shaft.. so i packed up and left never been back
you can do it!
Hurry up and get your car back on the road Marc;):thumbsup:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.