Civic ah engine swap

[iyader]

hey im planning to put a D15B 1.5Lt SOHC V-tec engine in my 87 AH for fun, i plan to use it just as a daily but i was wondering what do i need to change in the car to make this engine fit?

what mounts?
what gear box?
ECU?
Fuel lines, fuel tank and pump? cause my model is a 1.3L carbie D13

can any one help me out?? alot of info would help please cause this site doesnt really show alot on my model ^^

[trism]

*waits for lloyd to see thread*

:p

youll be able to use the box that comes with the d15, and it all should mount up in your bay coz the D series mounts are all teh same

ecu, just use the stock d15b ecu

you will need to do an efi conversion.

youll need either an intake pump or run a surge tank with an external pump

the engine loom and dash loom will all need to be changed to the d15 loom. best bet would be to try and find a front cut so you can use everything

[iyader]

*waits for lloyd to see thread*

:p

youll be able to use the box that comes with the d15, and it all should mount up in your bay coz the D series mounts are all teh same

ecu, just use the stock d15b ecu

you will need to do an efi conversion.

youll need either an intake pump or run a surge tank with an external pump

the engine loom and dash loom will all need to be changed to the d15 loom. best bet would be to try and find a front cut so you can use everything

the thing is i cant find a half cut just motor i was wondering can anyone bring me to a good site with with alot of d15-16 sohc vtec motors...cause im planning to strip my civic should weigh about 600-700 kilos with motor and restore it looking nice and clean

[trism]

research yourself

go to google

search for honda wreckers

[fat_85_civic]

it wont bolt in at all, you will haqve to make fully custom mounts to get it in there. The only engine that will bolt in easily will be the d16a3 from a 86-89 integra.
have a look here:
http://www.redpepperracing.com/forums/index.php?showtopic=13257

luke