PDA

View Full Version : 1994 vtir not kicking over



MEN15S
28-10-2008, 01:20 PM
Hey Guys,

Just want to pick your brain on something,

Ive got a 1994 VTIR TEGGY and its not starting

Checked for Fuel got fuel I can smell it out the rear exhaust,
Checked for Spark NO Spark,
Change Plugs Still NO Spark

Checked all Fuses All Fine
Check all cables going into Distributor Fine

Could this be a problem with the rotor in the Distributor or something else please help.

ECU-MAN
28-10-2008, 01:32 PM
blown ICM or Coil

MEN15S
28-10-2008, 01:38 PM
Can you buy just the ICM or do you have to buy the whole Distributor

ECU-MAN
28-10-2008, 03:24 PM
you can buy then seperately, but do some testing 1st to ensure thats what you need.

search the DIY section for the ICM coil test

VTec1987
28-10-2008, 03:26 PM
no need to buy the whole dizzy, try changing the coil first

VTI-RRR
28-10-2008, 04:59 PM
100% exactly the same thing happend to me and my car is also a 94 vtir, but the wierd thing was it happend wile driving, but its now fixed, it was just a coil......hope it helps:thumbsup:

OMG.JAI xD
28-10-2008, 05:11 PM
grab a msd external coil set. better spark for a lil bit extra dosh.

:thumbsup:

MEN15S
29-10-2008, 06:12 AM
100% exactly the same thing happend to me and my car is also a 94 vtir, but the wierd thing was it happend wile driving, but its now fixed, it was just a coil......hope it helps:thumbsup:

Thats what happen to me it slowly died

it was missing at 1st then just stopped

MEN15S
29-10-2008, 10:57 PM
anyone know where i can get a coil from in NSW Sydney ?

Sp00ny
30-10-2008, 01:04 AM
anyone know where i can get a coil from in NSW Sydney ?

Closest Honda Dealer? If your going genuine. If not any burson's / repco / autobahn store should stock bosch products in which alot are Japanese made anyway.

MEN15S
30-10-2008, 10:44 AM
you can buy then seperately, but do some testing 1st to ensure thats what you need.

search the DIY section for the ICM coil test

I done the test well the coil test anyway I didnt understand the 2nd half of the ICM test but the coil test my results werent the same as what it has in the DIY

So would it be the coil ?? since the results arent the same

MEN15S
31-10-2008, 04:10 AM
Hey guys I went to buy a coil today and its still not starting

So any ideas ?

MEN15S
03-11-2008, 01:26 AM
OK

I have replaced Coil and have Spark Now
I replaced Spark Plugs
Checked Leads and double check the go to correct place
I have Fuel I can smell it out the exhaust pipe,
I have Timming Belt Still Checked that as well
I reset the ECU

Its not starting Can anyone think of anything else to do please help.

Im running out of ideas.

Anyway to get s Engine Check code to see the problem ?

what else could it be ahhhhhhhhhhhh

OK this is what happen

The car started to Misfire then Died
Checked for Sparks Didnt get anything
Replaced the Coil

Now we have sparks but not starting ahhhhhhhh soo annoying

her0
03-11-2008, 02:24 AM
after all that, you might of flooded the engine with fuel? is that even possible? thats why it might now start now.

just food for thought.

ECU-MAN
03-11-2008, 08:17 AM
is the rotor button turning when you crank the engine ??

are there any codes in the ECU

MEN15S
03-11-2008, 11:44 AM
Rotor is spinning,

How do i get codes from ECU ?

EGJOE
03-11-2008, 12:16 PM
I know this might sound a bit backyard....
If you have a mate that has b series that is running try swaping suspect parts eg. like whole dizzy. If it starts something in dizzy and start swaping dizzy internals to narrow it down.
Check your alarm as well if you have one sometimes they have multiple stage imobilisers.

Cheers
EGJOE

kerim
03-11-2008, 12:28 PM
ey man, try the main relay if you haven't done so already,

http://www.ozhonda.com/forum/showthread.php?t=31796

MEN15S
04-11-2008, 12:11 AM
sounds like there isnt any compression ??

is that normal ?

hisoka
04-11-2008, 12:17 AM
did you try push starting it , ? eg joe got pretty good idea there.

VTec1987
04-11-2008, 11:33 PM
U fixed the spark problem but you probably messed up the leads


http://images.google.com.au/imgres?imgurl=http://img18.exs.cx/img18/7701/b16firingorder2.jpg&imgrefurl=http://www.hondatech.com.au/forum/showthread.php%3Ft%3D444&h=480&w=301&sz=37&hl=en&start=59&um=1&usg=__XwWsjINjdQeMqNLeGVktYJ0uYuY=&tbnid=L4DP0t4FbK1T-M:&tbnh=129&tbnw=81&prev=/images%3Fq%3Db18c%2Bdizzy%26start%3D54%26ndsp%3D18 %26um%3D1%26hl%3Den%26sa%3DN

MEN15S
05-11-2008, 03:32 PM
spark plugs are fine... still not starting

ECU-MAN
10-11-2008, 02:21 PM
do you get a strong spark, is a waek pissy spark ??

could still be the ICM