View Full Version : Another RB1 with Double DIN
evolution
30-10-2008, 12:34 AM
Finally got around to installing my aftermarket stereo. Basically this is what I got
Genuine Honda 2 DIN dash replacement
Genuine Honda factory radio replacement facia
Genuine Honda storage box to replace CD changer
Clarion MAX686BT Multimedia Head Unit
Clarion OHM107VD Overhead Monitor with DVD player
PAC SWI-JAC steering wheel control interface
Only thing I'm not satisfied with is the replacement facia for the factory stereo, the bloody thing is darker than the other woodgain panels and the grain is going up-down where all the others is going left-right. it is very obvious in photos.:(
http://i234.photobucket.com/albums/ee128/rb1odc/Odyssey/IMG_0443.jpg
mykool_itr
30-10-2008, 04:27 AM
damn nice mod, poor you for that piece of woodgain panel not matching up with the others. fast and the furious Tokyo drift on screens
AusAccord
30-10-2008, 08:01 AM
very nice Evo, was it done by shops or DIY? may need info fm u when doing mine :)
evolution
30-10-2008, 02:26 PM
Done by professional installer... I'm not as game on DIY as you
Mugen_Retro
31-10-2008, 11:32 PM
nice.. where did u get those double din set? I'm looking one..
Thanks
evolution
01-11-2008, 12:11 AM
Imported from overseas
aka_NSX
02-11-2008, 01:29 PM
Its Very NICE ........
if you ever think of installing the genuine Honda reverse camera like mine let me know, coz I will be in Japan next week
FitRS
02-11-2008, 03:30 PM
Shame about the non matching fascia..but the double din Clarion looks hot to trot :thumbsup::cool:
evolution
02-11-2008, 06:08 PM
Its Very NICE ........
if you ever think of installing the genuine Honda reverse camera like mine let me know, coz I will be in Japan next week
You got PM
evolution
02-11-2008, 06:14 PM
Thanks for the comments!
Nice. Do you have the part numbers for those parts?
evolution
03-11-2008, 09:08 PM
Nice. Do you have the part numbers for those parts?
Here you go
77250-SFE-J01ZB ( panel assy. YR287L )
http://www.supergt.info/full/ASHARB105.jpg
77129-SFE-000ZZ ( bracket, joint upper )
http://www.supergt.info/full/ASHARB103.jpg
77270-SFE-J01ZA ( panel assy. NH553L )
http://www.supergt.info/full/ASHARB105-1.jpg
77275-SFE-003ZB ( panel assy. YR287L )
http://www.supergt.info/full/ASHARB107.jpg
77112-SFE-000ZZ ( stay, R centre joint )
http://www.supergt.info/full/ASHARB103-1.jpg
77132-SFE-000ZZ ( stay, L. centre joint )
http://www.supergt.info/full/ASHARB103-2.jpg
77237-SFE-003ZA ( panel assy., centre instrument NH569L ruby mahogany black paint )
http://www.supergt.info/full/ASHARB104.jpg
77295-SFE-003ZB - This is the CD changer replacement storage box... no pics of it
AusAccord
04-11-2008, 10:10 AM
Evo, does it really need the L/R center joints or just the center bracket for fixing a headunit? don't tell me u order them fm SuperGT HKG................
evolution
04-11-2008, 10:33 AM
Those parts are a minimum requirement as a frame to hold the head unit in.
No I didn't get it from them, I just used them to get most of the part numbers and to have an idea of what the parts look like. I got the parts shipped over by Thian Seng in Singapore
I thought you already got your parts? The parts list was actually taken from your earlier thread except for the facia replacement and storage box..
aka_NSX
04-11-2008, 08:53 PM
Evo, does it really need the L/R center joints or just the center bracket for fixing a headunit? don't tell me u order them fm SuperGT HKG................
if you are handy its not that hard to make one otherwise its quite handy and easy to install with those bracket ............
AusAccord
05-11-2008, 11:22 AM
ok have all the parts for that w/o L/R center joints. what do u guys think, should i get them or not especially i'm in HKG at the moment?
evolution
05-11-2008, 12:41 PM
IMO.
Depends if you are going to put a 2 DIN unit in the future or just going to customise the touch screen and oem LCD screen for your carputer. If 2 DIN then might as well get them as they are pretty cheap (centre is S$32, left and right S$12 each. If just for carputer than maybe can get away with not having them. Btw, what I ordered did not come with any screws, but the installer said it was not a problem as they woud provided them with the install
Can i know how much did you pay just the double din replacement? There's a shop in indonesia that selling it less than $200 for all 6 parts.
Nice kit. Is that roof mount really a Clarion? Just curious.
AusAccord
16-02-2009, 03:14 PM
AUD 200 included shipping cost will be a good deal provide its Honda genuine parts.
aka_NSX
16-02-2009, 04:03 PM
Nice kit. Is that roof mount really a Clarion? Just curious.
yes, its definitely Clarion
evolution
16-02-2009, 05:21 PM
Can i know how much did you pay just the double din replacement? There's a shop in indonesia that selling it less than $200 for all 6 parts.
That's a good price, I paid double that amount including shipping.
Mine is brand new though
evolution
16-02-2009, 05:52 PM
Nice kit. Is that roof mount really a Clarion? Just curious.
It better be, it wasn't exactly dirt cheap.
It better be, it wasn't exactly dirt cheap.
Yeah sorry I dont know any better that's why I asked, it just reminded me of these (http://www.szviewtech.com/Product.asp?BigClassName=Car%20DVD%20Player&SmallClassName=Roof%20DVD).
That's a good price, I paid double that amount including shipping.
Mine is brand new though
This one is brand new as well and if i can bargain on the price if i buy more than 1. I'm planning to buy 2 kits for me & my friend.
evolution
18-02-2009, 12:12 AM
This one is brand new as well and if i can bargain on the price if i buy more than 1. I'm planning to buy 2 kits for me & my friend.
Yes I know, yours is brand new also. Just saying that you are getting it at half price and if it is a genuine set, then go for it. But then it makes me think how they can sell it at such a price? Aus_accord's set is genuine second hand set from JDM land and it already costs that much.
AusAccord
18-02-2009, 07:39 AM
hey Dan, Evo is correct, check if its genuine Honda parts otherwise make sure the quality is good. the fitment is tight up there and always expose to sunlight in Australia you know....... have seen some replicas in China cracked within a week.
aka_NSX
18-02-2009, 08:03 AM
thats true even in Japan the 2nd hand one already cost more than that, but you never know in Indonesia anything is possible . . .
thats really a bargain maybe I should ask my friend too . . .
I'll ask my friend to confirm it. In indo, even if it's genuine, you still can bargain, you just need to the right person hehe
aka_NSX, are you from indo?
AusAccord
18-09-2009, 10:21 AM
Evo, do u know is that hard to take the OEM center radio stuff off? i'm on my way from "brown" to "black"......
evolution
18-09-2009, 10:50 AM
Sorry mate, no idea... Professional installer did the install, which I just found out yesterday did a half arse job. My head unit is being held to the frame by just one screw and aparently did not connect a few wires..........
I bought the console kit from aka_NSX but i'll wait until i have the proper idea how i'm gonna put my amps & subs if i decided to get air suspension.
evolution
18-09-2009, 10:54 PM
How's this for sub positions?
http://i234.photobucket.com/albums/ee128/rb1odc/Odyssey/16072008177.jpg
http://i234.photobucket.com/albums/ee128/rb1odc/Odyssey/16072008179.jpg
http://i234.photobucket.com/albums/ee128/rb1odc/Odyssey/16072008173.jpg
Will not get in the way of the air tanks in the spare wheel well
aka_NSX
18-09-2009, 11:09 PM
is the sub at the front and rear running from the same Amp ? hows the sound ?
evolution
18-09-2009, 11:21 PM
No idea, came across these pics in another forum when the guy was selling the parts a few months ago, thought its was good places to put subs in our cramp car
Yeah, I saw this one before, the problem is only 10" or smaller sub can fit and my subs are 12" each.
felixd
19-09-2009, 10:12 AM
thats so damm neat ! ! ! ! !
St33p
19-09-2009, 02:22 PM
I've been thinking to put either 8" or 6.5" under the middle storage console
That place is of no use anyway, apart from storing the CD case.
I was thinking to put the DAD center console but it's too expensive.
evolution
01-01-2010, 06:09 PM
Here is a little update of part numbers for those who want to remove the factory radio and want to replace it with the correct panels
http://www.cyberstork.com/send_mail_file/279068-1.jpg
From the top
77237-SFE-003ZE : NH667L : black stone print
77237-SFE-003ZD : YR305L : garnet madrone red print
77237-SFE-003ZC : YR304L : garnet madrone brown print
77237-SFE-003ZB : YR393L : ruby mahogany yellow print - Don't have to bother with this colour, this interior woodgrain is only available in Japan
Not pictured - This was the wrong colour that I got on my RB1
77237-SFE-003ZA : NH569L : ruby mahogany black print
evolution
13-02-2010, 07:11 AM
Finally manged to change my mis-matching OEM stereo replacement panel to the correct design
http://i234.photobucket.com/albums/ee128/rb1odc/Odyssey/IMG_2054.jpg
My dash board at night
http://i234.photobucket.com/albums/ee128/rb1odc/Odyssey/IMG_2064.jpg
Thanks to Ajto for sourcing the clock
AusAccord
13-02-2010, 07:46 AM
looks great Damien!! that give me motivation to do something on mine.......
baboo
13-02-2010, 09:19 AM
Nice setup, makes me want to have the double DIN setup too!
your clock doesnt seem to line up :P
And thanks for sourcing the panel for me.
eg5civic
14-02-2010, 12:19 AM
looks boss
KevinM
13-02-2016, 07:12 AM
Hi Atjo,
Do you know which shop in Indonesia selling it?
Did you end up buying them from Indonesia?
Cheers
Daveho1
13-02-2016, 07:30 AM
You know this thread was like 5 years and 364 days ago yeah?
KevinM
13-02-2016, 07:47 AM
I know, new to this forum.
Thanks for the reminder.:honda:
Daveho1
13-02-2016, 08:06 AM
For what it's worth if you can come up with a part number for the genuine kit you are looking for and ask the parts person at the local dealership they can put in a request, sometime Honda will sell to other domestic markets, typically items like this get called "consult parts" in the Honda system and they won't give you an answer right away so give them your number and assuming they are capable they will call u back with an answer, dispite what others say dealership parts arnt always bullshit expensive the EG double din console for example was surprisingly cheap new.
evolution
13-02-2016, 08:38 AM
For what it's worth if you can come up with a part number for the genuine kit you are looking for and ask the parts person at the local dealership they can put in a request, sometime Honda will sell to other domestic markets, typically items like this get called "consult parts" in the Honda system and they won't give you an answer right away so give them your number and assuming they are capable they will call u back with an answer, dispite what others say dealership parts arnt always bullshit expensive the EG double din console for example was surprisingly cheap new.
Seriously find that hard to believe... maybe times have changed. The dealerships I asked before just said sorry, can't get them on the spot.
Daveho1
13-02-2016, 09:11 AM
Seriously find that hard to believe... maybe times have changed. The dealerships I asked before just said sorry, can't get them on the spot.
It's cause it's a ****around and really the time it takes generally isn't worth it. More likely however the kit may well be discontinued as Honda don't make accesories for that long
AusAccord
13-02-2016, 09:13 AM
pm me if anyone wants an used kit, eveything you need. my RB1 sold and some parts left over.
KevinM
13-02-2016, 11:01 AM
Hi AusAccord,
Do you still have Fascia Kit for Honda Odyssey 2006?
AusAccord
13-02-2016, 11:28 AM
Hi AusAccord,
Do you still have Fascia Kit for Honda Odyssey 2006?
yes, full kit with storage box replaces oem cd player. throw me an offer.
KevinM
13-02-2016, 12:07 PM
could you please send me some photos.
Where you based Sydney?
AusAccord
13-02-2016, 12:44 PM
could you please send me some photos.
Where you based Sydney?
need to dig them up from storage and locate near Strathfield. pm me your mobile and i'll whatsapp photos.
KevinM
13-02-2016, 02:13 PM
my mobile no. 0433 278 974.
I will be in Lidcombe around 5pm, if you free would be good to see them and hopefully can make you an offer.
Regards,
Kevin
AusAccord
13-02-2016, 02:32 PM
my mobile no. 0433 278 974.
I will be in Lidcombe around 5pm, if you free would be good to see them and hopefully can make you an offer.
Regards,
Kevin
hi Kevin, whatsapp you.
What other parts do you have left?
faazi
08-05-2016, 03:47 PM
Hi everyone
I am looking for the honda odyssey 2006 rb1 2 din facia kit (the complete set)
Can anyone please help me
evolution
08-05-2016, 09:57 PM
Options would be:
Ask traders in OzHonda if they can bring it in (Gaijin-Garage?). Maybe try JDM Concept, I seem to recall them stocking the 2DIN parts at one stage.
Ask someone in South East Asia to order the parts from stockist there (I have used a Singapore based stockist - Thian Seng Motors to get OEM parts, pretty good people to deal with)
Ask JDM exporters (like Jesse Streeter, import monster etc) to see if they can get second hand parts from yahoo japan auctions
http://auctions.search.yahoo.co.jp/search?ei=UTF-8&p=rb1+2din&oq=&n=100&auccat=0&slider=0&tab_ex=commerce&s1=cbids&o1=a
Ask Honda Australia if they can bring in the parts since you have all the part numbers.
Good luck
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.