honda part# the same for US and AUS??

[DNYALL]

I got a few part numbers for some bits n peices from H-Tech. just wondering if I go into a honda dealer in Aus and quote the part numbers, are they gonna look at me like an idiot? Or are they the same?

If your wondering they are the part numbers for a couple of bushings in the engine bay:

part #91610-sf4-003 = harness hole, passenger side

part #90621-SE0-000 = harness hole, drivers side

Thanks,
-Mike

[trism]

why not jsut try it?

1.wait till morning
2.call up and ask
3.??????
4. profit

[blk_shadow]

I got a few part numbers for some bits n peices from H-Tech. just wondering if I go into a honda dealer in Aus and quote the part numbers, are they gonna look at me like an idiot? Or are they the same?

If your wondering they are the part numbers for a couple of bushings in the engine bay:

part #91610-sf4-003 = harness hole, passenger side

part #90621-SE0-000 = harness hole, drivers side

Thanks,
-Mike


mike, just sms me the part number and I can check it for u at work

[DNYALL]

awesome msging now :) Thanks Adwin :thumbsup:

[blk_shadow]

yep got ur sms. I'll let u know 2moro

[DNYALL]

done and dusted, thanks for that mate

[blk_shadow]

no worries mate. they're on the way :D

[Vtec_Me!]

So just for confirmation and future reference, are US part numbers the same as AUS part numbers? Sorry to revive an old thread but didnt want to start another thread :D

[DNYALL]

for the parts i was after, they did correspond to the same parts in AUS. But I don't know if it is the same for all parts.

I got part numbers for a few rubber hole bushings off the US forums and they turned out to be right for the parts here in AUS.

[Vtec_Me!]

for the parts i was after, they did correspond to the same parts in AUS. But I don't know if it is the same for all parts.

I got part numbers for a few rubber hole bushings off the US forums and they turned out to be right for the parts here in AUS.

Oh ok thanks for that confirmation DNYALL, im after quite a few oem parts and stumbled on a US website that provides part numbers for both honda and acura but still unsure

[blk_shadow]

Oh ok thanks for that confirmation DNYALL, im after quite a few oem parts and stumbled on a US website that provides part numbers for both honda and acura but still unsure

Some of them are and some of them dont.
But u can forget about the acura part number cos they wont work in aus.

[Vtec_Me!]

Some of them are and some of them dont.
But u can forget about the acura part number cos they wont work in aus.

Yea i didnt bother looking through the acura parts. Il ring honda and give them the part numbers i have, thanks guys

[riruiz_88]

be carefull if your are ordering parts from USA. some parts vary because of Left and Right hand drive. things such as fog lights would be different because of length of cable and other things. but some are exactly the same, just do some good research to make sure it fits your car.

[Vtec_Me!]

be carefull if your are ordering parts from USA. some parts vary because of Left and Right hand drive. things such as fog lights would be different because of length of cable and other things. but some are exactly the same, just do some good research to make sure it fits your car.

I knew about the variations from Lhd and Rhd but not about the cable lengths thanks riruiz_88. Initial plan was research and order the parts. I found this website through a thread on here:

http://www.hondapartsunlimited.com/index.php?p=home

Because it was US website, i revived this thread but anyways il give honda a call tommorow and cross reference with them the part numbers :D

[riruiz_88]

just ask honda aus if in doubt man. all they can say is "NO", no big deal.