Installing coilovers?

[mr_vtec]

i gave it ago last weekend..

i tried on the rears but dam the rear hubs wouldnt drop so something is holding it..

can anyone give me a heads up so i can try do it myself/?

[papa_]

this might help you

http://www.s2ki.com/forums/index.php?showtopic=303417

or

http://www.s2ki.com/forums/index.php?showtopic=477286&st=0&#entry10179449

[bennjamin]

id say the rear swaybar is still holding it up in place. You need to jack the entire end off the ground , on jack stands too.

[ludecrs]

And an OzHonda link:
http://www.ozhonda.com/forum/showthread.php?t=87001&highlight=s2000

[mr_vtec]

but mine doesnt drop guys..
not all of them drop the sway bar? :(

[vyets]

Just push the hub down, it should drop as soon as you unbolt the strut from the lca.
You have to push it down hard, I got my mate to stand on mine :)

[mr_vtec]

thanks for the help guys got it all done..

**** the buddy clubs are kinda a good ride very happy with them so far..

just sux the rear doesnt go that low its sits jsut a little more then before but damm the fronts go veryyyyyy lowww lol..

[NVD52K]

how many inches did you drop it ?

[mr_vtec]

i went like half and inch lower on rear but front i went an inch higher...
ill post pics soon

[HRV-80Y]

pics now LOL !

[JasonGilholme]

i'm guessing you got adjustables. adjust them man! lol

[mr_vtec]

yea i wanted to make the car look good but not scrub on the front..

so i lifted the front up over the rubber and the rear is over rubber lol..

[NVD52K]

did you relocate your bumper screws and stuff for your rims to clear the guard?