H22A conversion

[Newcivic]

Hi guys
I just recently put a H22A into my accord and its throwing a code 6 and 20 which are engine coolant temperature (ECT) and engine load detector.

Does anyone know where these plugs are on the engine and what they look like? Because im quite certain this is the reason why the car wont hit vtec!

thanks

[barefootbonzai]

ECT should be near the top radiator hose, it's a 2 wire plug, circular. You shouldn't need to worry about the Engine Load detector.

[Newcivic]

Soo i took some photos!

http://i63.photobucket.com/albums/h132/itr69/sensor.jpg
http://i63.photobucket.com/albums/h132/itr69/sensor2.jpg

there is 2 plugs one on the water pipe and one on the head... which one is it!

[MikeyG]

the black one


sorry i had to say it ahha :(

[thepope1986]

man how untidy is the wiring. id be getting some corrugated tubing with the split down the side and neatening up all wires

[Benson]

the black one


sorry i had to say it ahha :(

how is it the black one noob

Brian its the grey plug with the two wires on the head
The plug on the adaptor is the fan switch

[barefootbonzai]

yeah, it's the one with the yellow + black wires in the pic.

[VTec1987]

Don't worry to much abt the ELD, just get it disabled from the rom
You will get ELD code when using a jdm ecu