PDA

View Full Version : NGK Spark plug Number



wOlfee
21-11-2008, 05:51 PM
hey i baught a set of NGK leads for my 93 Civic Si

the number i got off ngk website was RC-HE76 but when i fitted the leads the where to long stuck out of engine about 5 or so centre metres..:(

was wondering if anyone has baught ngk leads for there eg SI and if so what the part number was?..

Thanks.

wOlfee
21-11-2008, 06:15 PM
mayeb the RC-HE73 which fits a VTI engine would be the go??. anyone no if this would fit? it's a SOHC engine mine DOHC. would this matter.

aaronng
21-11-2008, 07:14 PM
Edit: Reading owns me... :p

bennjamin
21-11-2008, 07:45 PM
mayeb the RC-HE73 which fits a VTI engine would be the go??. anyone no if this would fit? it's a SOHC engine mine DOHC. would this matter.


YES it matters

The d16a8 (your engine) has shorter leads due to the DOHC layout and vertical spark plug holes.
The vti engine , is SOHC and has banked spark plug holes....so the leads are actually longer.

riruiz_88
21-11-2008, 08:24 PM
i had exactly the same problem as you man. after much searching i found the correct part #. u should get RC-HE81. although this part number is for a DOHC CRX, it has the same engine as us. will be a direct fit man:thumbsup:

tiksie
22-11-2008, 01:18 AM
You could have just went to a Auto store and asked them lol, they would have given you the number as it's in that huge book.

wOlfee
22-11-2008, 03:19 AM
i had exactly the same problem as you man. after much searching i found the correct part #. u should get RC-HE81. although this part number is for a DOHC CRX, it has the same engine as us. will be a direct fit man:thumbsup:

yeh thanks heeps :thumbsup: i went off the ngk website but didnt fit ill give this one a go RC-HE81

cheers.

riruiz_88
09-12-2008, 09:42 PM
hey dude, any updates?

ECU-MAN
12-12-2008, 08:08 AM
http://b16a2.kicks-ass.net/automotive/honda/techguide/civic/92-93+Si_tech_guide.htm

NGK BKR6E-111
1.1 mm

riruiz_88
12-12-2008, 10:52 AM
thats awsome info man, but he is after part# for leads

ECU-MAN
12-12-2008, 11:16 AM
Doh !!!

I didnt read correctly :(