..........................

[xQuizit]

...............................

[bennjamin]

the lower bar is the standard tiebar. It does something. You should reconsider installing the beaks....

Anyway , to install you must have the lower control arms free IE loose (ends disconnected and shock disconnected and you simply take out the longer 14mm headed bolt , place the tiebar on then reapply the 14mm bolts.

[xQuizit]

..............................

[hisoka]

ohok thanks... btw howcome you think i shuld reconsider? ye i just consider it as bling bling lol

ill assume you are owner of integra R, he is saying reconsider, because they come with this standard, just looks a bit different. the bar that is in the picture does exact same thing, so inface you are just weighting down the car lol.

but i think it looks cool, i had one on my eg.

if you can be bothered installing it, then go for it. it also scrapes everywere. none the less its a very cool part.

[T-onedc2]

Yeah basically you don't need it on the R, when I fitted mine I removed the lower bolt on the frames of the ABS line on each side of the subframe, took the bracket to the work bench and used a grinder to cut away the part which fouled the tie bar and reattached the brackets slightly re-routing the ABS line underneath the tie bar mounts.

Pic added: perhaps I should re-route it over the tie bar instead
http://i17.photobucket.com/albums/b55/Tykie/27112008073.jpg

[JasonGilholme]

beaks = bling

OEM = functional

[xQuizit]

....................

[hisoka]

so are you gonna install it or not ? looks cool but lol. i installed it myself at home so not hard either but for your car looks different

[xQuizit]

..................................

[hisoka]

i dont remeber moving any of those wires out the way, all i did was take out those two bolts and line it up and put them back in. i did some other wierd shit, but you dont need to. for some reason i took out sways and pretty much everything else lol.

btw if your a bit confused, were the green arrow is pointing that thing does same as beaks

[xQuizit]

.................................

[zco]

maybe because his car is a type R

[SiReal]

maybe because his car is a type R
im a bit confused. if its a type R, as per the pics above, should the rear shock be eyelet as opposed to fork?

[T-onedc2]

yep gona install it soon hopefully =].. howcome it looks abit different btw?
The gold bar messed with my colour scheme, so i removed it and sprayed it satin black, then peeled the black beaks sticker leaving "beaks" gold, reversed the colour scheme.

ohok did u have the use a jack or nething to keep the car up,, when you unbolt those nuts?
YES!!! :eek:

im a bit confused. if its a type R, as per the pics above, should the rear shock be eyelet as opposed to fork?
looks like he sourced some coilovers to suit VTi-R, likely fom the US to suit GS-R, hence needing those lca's

[hisoka]

ohok did u have the use a jack or nething to keep the car up,, when you unbolt those nuts?

yer, you might need someone to help you aswell.