PDA

View Full Version : ...........................................



underbelly
02-12-2008, 01:12 PM
...........................................

mars_panas
02-12-2008, 01:19 PM
Step1
Pull towards the front of the side marker to gain access to the back.

Step2
Pop out the back of the marker. You can use a small screw driver if necessary to pop the back out. The marker should now be out.

Step3
Remove the light bulb from the stock side marker and place into the new one.

Step4
Carefully place the new side marker into position and pop it back in.

Step5
Repeat steps 1-4 on the other side marker.

Sorry have no pics...

mocchi
05-12-2008, 03:34 PM
do you know how to remove the fender?
there are 6 bolts (10mm) to undo to take out the fender.

3 bolts in engine bay

2 bolts under side skirt
to remove side skirt, there are around 4 screws holding the skirts and some clips
undo the screws from bottom of side skirt, and push the skirt to the side to take
them off (dont pull it. push sideways, different type of clips).

1 bolt behind your door.

after that then.. you know what to do la.

TheGoodDeal
19-12-2008, 02:47 PM
The indicator have a small clip. Use small flat head srew driver to unclip it from the small gap on the indicator

saikou27
19-12-2008, 07:53 PM
The indicator have a small clip. Use small flat head srew driver to unclip it from the small gap on the indicator

the clip is on the side closest to the door. the silver bit is what u must push down on.

http://http://i422.photobucket.com/albums/pp304/saikou27/Image019.jpg


http://http://i422.photobucket.com/albums/pp304/saikou27/Image020.jpg

hope this helps:)