Help with Speakers connection.

[LowEk]

I have a EM1 and i just tried to hook up some speakers in the front but i came accross this problem where the wires in the car have 4 wires (2 grey and 2 blue) but i dont know what i have to connect to wot. pic below. your help would be greatful. :)

http://i26.photobucket.com/albums/c143/MPR55/SPEAKERHELP.jpg

[mars_panas]

is the buttom pic the harness on the back of your head unit???

[LowEk]

is the buttom pic the harness on the back of your head unit???


No sorry should have said its from the door.

[mars_panas]

im not sure but i think you can cut the adepter off and just re-wire it.... both (-) wire connect it to the single (-) one that is on your speakers and then use duck-tape... and do the same to the (+) ones...

but don't try it yet coz i am not sure myself...

[LowEk]

Thanks Mars but can anyone confirm this??

[LowEk]

Anyone?? i wanted to do this today.

[LowEk]

come on someone has to know...... cos you all cant tell me your running stock speakers in your front doors???

[LowEk]

Done. Close Thread.

[mars_panas]

hey lowek wat did you end up doing??

[LowEk]

2 blue together and 2 grey together. grey is Neg and blue is pos. i just tried one of each first and it worked so i thought ide try the two and it still worked so problem solved. :)

[sammy342]

can anyone explain y there is 2 of each ?

[LowEk]

can anyone explain y there is 2 of each ?


The funny thing i found after doing it yesterday was it only had the 4 wires on the passanger side. and it was also part of the loom.

[mapdit]

can anyone explain y there is 2 of each ?

usually for the tweeter

[LowEk]

usually for the tweeter


yeh but in my case it was only on one side being the passenger side door. and was also part of the std loom.