+35 offset can fit in dc2r?

[Mr Rzz]

i found a set SSR Type C WHEELS
it is
5 Stud 114.3 PCD"
15x7 OFFSET +35

will this fit dc2r?

:cool:

[chargeR]

That will fit nicely. You might need to roll your rear guards if your car is dumped with zero camber.

I would probably go with a 205/50 tyre.

EDIT: SSR Type Cs are the greatest wheel ever made.

[Mr Rzz]

That will fit nicely. You might need to roll your rear guards if your car is dumped with zero camber.

I would probably go with a 205/50 tyre.

EDIT: SSR Type Cs are the greatest wheel ever made.

icic thxx for detail

i am using 16 ATM and camber at front is -1 and rear is -1.5

so if i change to 15 i need change rear to 0?

[chargeR]

icic thxx for detail

i am using 16 ATM and camber at front is -1 and rear is -1.5

so if i change to 15 i need change rear to 0?

Nah you should be fine with those settings. I was just saying that if you had 0 degrees camber at the rear you might have to roll because +35 is slightly lower offset than stock but with your current camber you will be fine.

You should be okay to just bolt the wheels on and go :thumbsup:.

[Mr Rzz]

oic ^^

thxxx

[DLO01]

It will be very close at the rear. You will prol have to roll lips, depending on tyre size.

I had 16x7 +40, 205/45 tyres and was very close at the rear (lowered).

[wp89]

will fit i had 17 +32 on before was flush at the front,rear needs to be rolled