View Full Version : ...........................................
underbelly
01-01-2009, 10:37 AM
...........................................
SiReal
01-01-2009, 11:18 AM
you didnt look hard enough.
http://ozhonda.com/forum/showpost.php?p=2052207&postcount=6
and yes, u need to remove all the panels
SiReal
01-01-2009, 11:45 AM
just to let you know I followed that exact guide and i manged to chnage my head unit. (and i live in australia and have an australian delivered EJ8).
http://www.groundupgarage.com/episode-2.html - see how the whole underdash bit is gone? u need to remove it to access the bolt that holds the HU to the dash.
u need to remove the panels.
its not that hard. if u find u removed a panel unnecesarily, then just screw it back on.
its your car, dont be afraid to play around with it. Just get out there, and go do it.
*/leaves thread*
simonnowis
01-01-2009, 01:39 PM
i used the same guide on installdr to install a headunit into my ek, once you take the panels off its pretty easy to figure out what needs to be unscrewed unpluged etc.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.