cusco zero2, rebound adjust knob?

[vinnY]

silly question but i can't find the answer anywhere

is there supposed to be a knob to adjust the rebound on cusco zero2's?
i see theres a nipple like koni's but insure whether it came with a knob to adjust it like the konis or not

and should the little nipple be able to spin all the way around or just stop when you hit either 1 or 5?

[LAGOOT]

afaik there is no rebound adjustment knob
only damper adjustment. (do correct me if im wrong)

your question about the 'nipple', it should stop once you reach the desired level of damper.
not spin 'freely' if thats what your asking

[vinnY]

google has failed me *shakes fist*
going off the photo here (http://www.gruppe-s.com/Ben/Suspension/evo_suspension/cusco_zero2r_evo.jpg)

going from that photo, should the nipple thing have a knob or do you just have to use a pair of plyers to twist it?

hmm i better double check whether it spins all the way around or not

[90LAN]

u need a little flat head to move the damper adjust
there is a little mark which indicates what no you are on
1 is soft 5 is hard

[vinnY]

i should have mentioned they're from an ek9
and since i'm a bit retarded at explaining i'll let some photos do the talking

http://img149.imageshack.us/img149/3680/cusco1aj3.jpg (http://imageshack.us)
this is the top showing the numbers, should i be able to go straight from 1 to 5 or should i have to go through 1-2-3-4 to reach 5?

http://img296.imageshack.us/img296/7643/cusco2de0.jpg (http://imageshack.us)
heres the nipple i mentioned earlier, it's like koni yellows but smaller, don't really have a knob for it either, i've been adjusting it with a pair of plyers but it'd be nice if i could just twist it with a knob :)