exhaust size

[crunkman99]

hi all, just wondering if any one knows the size of the stock pipes for their exhaust and if they are clampped on to the stock cannons, becasue i bought some after market cannons with a 2.5 inch inlet and 4 inch tip.

cheers

[snYpz]

I know the outpipe of the headers is 2", so i would guess 2" pipe as well?

Someone needs to confirm though :p

[integral90]

The stock exhaust is 2.25". The right side muffler (looking from the back) is welded into the catback but the muffler on the left is just bolted on.

[Crapdaz]

The stock exhaust is 2.25". The right side muffler (looking from the back) is welded into the catback but the muffler on the left is just bolted on.
+1 to this....


hi all, just wondering if any one knows the size of the stock pipes for their exhaust and if they are clampped on to the stock cannons, becasue i bought some after market cannons with a 2.5 inch inlet and 4 inch tip.

cheers
if you bought mufflers only you will need to cut and weld them on to suit as above only 1 side is bolted on....

[crunkman99]

yer i checked the right side is bolt on, cutting and welding the other one on tomorow

[Crapdaz]

take photos, but imo i wouldn't want to modify anything stock as i will part out my car later on and stocky it back before i trade it in.

[crunkman99]

yer i will keep the stock cannons to put back on, what does imo mean lol

[tony1234]

yer i will keep the stock cannons to put back on, what does imo mean lol
imo=In my opinion.

[crunkman99]

cant weld them on today, put the car on the hoist and didnt look like an easy job beacsue the pipe sizes are different so i have booked in on friday at a exhasut place. hmmm the wait

[integral90]

I would have thought that the 2.25" catback piping would fit inside the 2.5" muffler piping quite snuggle? Did you try machining down the catback to fit inside the 2.5"?

[Crapdaz]

shouldn't be too hard of a job unless they didnt have the enlarge section from 2.25>2.5".