PDA

View Full Version : Mugen ECU for K series



jaseDC5R
05-01-2009, 05:43 PM
Hey guys

Im looking to get a ECU for my DC5r and heard something interesting abt the Mugen ECU. Apparantely the Mugen N1 ECU tunes itself by getting readings from the sensors. can anyone confirm this?

TODA AU
05-01-2009, 06:26 PM
It's ok, (Hondata is better)
It's pre tuned & cannot tune itself except for long term fuel & knock trims.
Works well with all Mugen parts.
Not recommended for cam changes.
Put a post up in wanted to buy section... You should find one on here for a good price.

jaseDC5R
05-01-2009, 06:29 PM
thanks for the info.....
was thinking to go either hondata or mugen....but i know u need a race license to purchase the mugen.

chargeR
05-01-2009, 08:00 PM
thanks for the info.....
was thinking to go either hondata or mugen....but i know u need a race license to purchase the mugen.

You generally do need race hookups to get the N1 9000+ RPM version of the mugen ECU. I know of more than one in Aus though so they can be had second hand.

Mugen race parts are awesome though. Chicks dig them.

qstoria
05-06-2009, 05:42 PM
old thread but..

are there two versions of the N1 ecu?

air23box
11-07-2009, 10:19 AM
Yes it is....there is mugen Street ecu which rev to 8600rpm and Mugen N1 which rev to 9200rpm...Both of the Vtec change over at 5200rpm...race team usually use the 8600rpm one for long race and N1 for short race......They are generally about 1k-1.2k 2nd hand........about 1.8k brand new.....not sure about the price now since the exhange rate is so bad......in order to install it in audm DC5R you need to bridge a wire to your immoboliser or it won't start......also you will see the little green key light keep flashing....just ignore it........or you can pull the little green plug off behind the steeling wheel.....hope that helps..

mystic
11-07-2009, 11:30 AM
Is there a Mugen ECU for 2005 Type S models?

air23box
11-07-2009, 11:34 AM
Yeah...they are the same....

mystic
11-07-2009, 11:35 AM
Sweet gonna have a look for one.

Thanks!

qstoria
11-07-2009, 12:42 PM
Sweet gonna have a look for one.

Thanks!

1k and ill send you mine on monday

qstoria
11-07-2009, 01:00 PM
btw mine is the 8600rpm one obviously!

mystic
11-07-2009, 01:29 PM
Dont suppose you've plugged it into a 2005 DC5 Type S model before? Havent been able to find anywhere on the net about Mugen ECU (02-04) and a 2005 model....

qstoria
11-07-2009, 03:39 PM
not a type s sorry. a dc5r yep and it is quite noticeable over stock!

I am not sure how different a type s is from a type r. If i had to guess then i would say they would be pretty much the same. see what u find and if you are interested just let me know.

blk_shadow
11-07-2009, 08:06 PM
shame there is none available for EP3R

qstoria
11-07-2009, 08:49 PM
shame there is none available for EP3R

what do u mean? can they not be used on in an ep3?

Dr.k20z1
11-07-2009, 09:09 PM
pm me if anyone wants to sell

blk_shadow
11-07-2009, 09:27 PM
what do u mean? can they not be used on in an ep3?

I never find one that is applicable for EP3 anywhere. so not sure. the one for DC5R, Mugen actually recommends to change the valve spring as well (or is this the one for the N1 spec?)...so really not sure about running with stock internals when I can use that for my EP3.

qstoria
11-07-2009, 09:58 PM
i have used it fine for over 3 years now. stock motor apart from toda pistons. i'd say the n1 spec u would want higher spec valve springs perhaps. As for running it with an ep3, i would have thought that as long as u can plug it in then it would work. they are made for the K20A motors, not specifically for integras or civics etc.

qstoria
11-07-2009, 09:59 PM
pm me if anyone wants to sell

like i said before, 1k and ill post it to you monday

mystic
12-07-2009, 02:32 AM
like i said before, 1k and ill post it to you monday

I think Dr.k20z1 is in the same boat as me with a type S. I've talked to a local guy in Perth and informed me I need to get 02-04 ecu and get hondata to update it to fit an 05 model. Hopefully this will get me somewhere!

JDM.Power
12-07-2009, 12:09 PM
I think Dr.k20z1 is in the same boat as me with a type S. I've talked to a local guy in Perth and informed me I need to get 02-04 ecu and get hondata to update it to fit an 05 model. Hopefully this will get me somewhere!

yes this is correct,

refer to hondata site.

02-04 and 05+ are different

qstoria
12-07-2009, 05:21 PM
ok im a little confused here? are you guys all saying that the mugen n1 k20 ecu cannot be used in a type s? I am also confused as to why hondata is being mentioned?

mystic
12-07-2009, 05:32 PM
Havent found any reference of anyone with a 2005 model and a Mugen ECU. All the sites that are selling it have the 02-04 stated. Airbox23 said its the same for the 05 Type S, so it could work?


ok im a little confused here? are you guys all saying that the mugen n1 k20 ecu cannot be used in a type s? I am also confused as to why hondata is being mentioned?

denrie
12-07-2009, 05:48 PM
There is one available for EP3R. Username (nvdvtc) bought his EP3R with a Mugen ECU and is selling it. Give him a buzz if interested guys.

BusterSonic12
13-07-2009, 02:42 AM
anyone does a diy guide to change mugen ecu back to stock? because toda has welded some wire together for the immobilizer or something. how do i undo it?