EG/EK 5 stud conversion

[blitz_gti]

Before I get blasted I HAVE used the search function but did not find what I was after.

I just need to know what parts EXACTLY are needed to convert to 5 stud, I assume both EG and EK civics will require the same parts. If not please correct me.

Thankyou in advance

[markoJEK1]

32mm shafts setup is much easier to work with / find sprae parts, so anything from AUDM Integra 5 stud or EK9 5 stud

for a full proper conversion:

Front hubs / knuckles / rotors / calipers
Rear trailing arms / Handbrake cables / hubs / rotors / calipers
Brake Booster / Master cylinder / Prop valve

This is the full package , you can get away without upgrading the Brake booster / master cylinder and prop valve but the setup wont be as effective, so try and get the whole package

[blitz_gti]

Thnks for all that, just what I was after. Just need to find me a wrecked late model integra. Easier said than done I would think.

So just to clear up, its the same parts required for converting both eg and ek civics?

Cheers

[ECU-MAN]

for the front yes, for the rear EK only needs the DC2R rear hubs, hoses and hand brake cable. you use the ek rear arms

[markoJEK1]

Thats true, Ive converted everything to EK9.

Would the offets differ between EK1 (+40) - EK9 ( ? ) - DC2 (+50?) resulting in having different offset on front vs rear