PDA

View Full Version : wheel fitment for eg civic



he-tec
08-01-2009, 03:08 PM
looking to buy a set of 15's for a eg civic.

the wheels are 4x100 and were on a rwd
Front 15x7 ET +36
Rear 15x7.5 ET +30

will these fit without any problems or will i need some modifications? spacers etc..

any help would be great

cheers

Sir_vtec
08-01-2009, 04:02 PM
15x7.5 should go on the fronts and the other pair on the rear.

The 15x7.5 should sit about 18mm more flush then the 15x7.

Rolling your guards are something u should start with first, and tyre size. no spacers or just go buy Sport max.

chargeR
08-01-2009, 10:18 PM
15x7.5 should go on the fronts and the other pair on the rear.

The 15x7.5 should sit about 18mm more flush then the 15x7.

Rolling your guards are something u should start with first, and tyre size. no spacers or just go buy Sport max.

Definitely put the 7.5s on the front. They are only around 12mm more flush than the 7s though.

Put a 205/50 on both ends, roll the rear guards, and then play with camber a little and you will be fine. If you don't have adjustable camber then negative camber from dumpage should be adequate to tuck them under the guards.