boot lining + just sound deadend

[crunkman99]

in the process of sound deadending my whole boot, just finished the parcel shelf, and it works so well, but my rear window still keeps jumping out :( lol.

i used stinger rather than dynamat beacasue stinger is made by alpine and is alot thicker.

i am trying to do my boot roof, but i cant take off the lining, does any one know how?

i have unscrewed the 3 screws, its just the other screw things dont seem to want to come out and i dont want to break them.

cheers

[TRaNz]

them screws, i just used a flathead screwdriver and popped them out.....but yeah broke like a few. LOL. Though dad had a few spares lying around so i just used them, i think you can buy them from local shops like SuperCheap/Autobarn/Repco or even bunnings.

[Ken-f]

theres a lot of clips you need to undo. All of them are in very obvious places. Then you have the 2 rubber strips. Just undo it and slide it off. Hard to explain, but its very straight forward to do.

[crunkman99]

yer ill get back to finishes wen i stop playin css, got to distracted

[TRaNz]

so howd you go, how many did you break? LOL

[crunkman99]

not bad didnt break any, but a bit dissaponited witht the boot, still rattles and u can hear it buzz wen i turn it loud, the parcel shelf is sik tho doesnt vibrate at all

[ope126]

not bad didnt break any, but a bit dissaponited witht the boot, still rattles and u can hear it buzz wen i turn it loud, the parcel shelf is sik tho doesnt vibrate at all

The "BUZZ" could possibly be the two cross rail / tension springs that move when the boot opens and closes. I get a buzz in mine also, I think it is the clip in the middle, I need to wrap some tape / foam to suppress the rattle / buzz. Let me know how you go...

[crunkman99]

The "BUZZ" could possibly be the two cross rail / tension springs that move when the boot opens and closes. I get a buzz in mine also, I think it is the clip in the middle, I need to wrap some tape / foam to suppress the rattle / buzz. Let me know how you go...

i had a buzz on my parcl shelf from the rear brake light that sits in the parcel shelf, but i filled it in with stinger and that stops,

im not quite sure what u mean by the springs, does ur boot just fling up?

mine used to just pop open and sit slightly open, now wen i had my sub in there in flings straight up

[thatguy]

i have that rattle bad... its the tension springs and also the black box the middle seat belt retracts into.. all the gears in it rattle so much.. and one overcome this one???

[pitiek]

I was about to start a thread about installing dynamat in the boot but voila.... Here it is..
Has anyone done the whole boot? Any significant improvement compared to stock?