What header is recommended for B18C? [Archive]

CTR_EK9

12-01-2009, 06:11 PM

Hey guys,

My budget is $800, looking to buy a good header, I've got a B18C, got vision cat and mugen twinloop. What header is best to suit my car?

thanks guys

Zdster

12-01-2009, 07:28 PM

A B18 what? Vtir? Type R? GSi?

CTR_EK9

12-01-2009, 08:36 PM

A B18 what? Vtir? Type R? GSi?

B18C can only be JDM type r motor, sorry didnt make myself clear

Alexx

12-01-2009, 09:56 PM

In that price range, look at getting a hytech replica tri-y header. Will give good gains on your 1.8

night_wolf

12-01-2009, 10:03 PM

i would advise you to think about where you want your power. if you want high end power thats in the Vtec band, 4-1 headers are the best.

if you do some research you shall find that TODA are the best hands down. but cost a pretty peny. suprising thing and also a good thing is that the TODA replica headers are the same as the original. same bend and same length of inlet and outlet. they tend to go for about $250. know one person who really has gone to the extend of comparing the original and replica and hasnt found a difference in it and just loves the replica the same as the original.

CTR_EK9

12-01-2009, 10:05 PM

i would advise you to think about where you want your power. if you want high end power thats in the Vtec band, 4-1 headers are the best.

if you do some research you shall find that TODA are the best hands down. but cost a pretty peny. suprising thing and also a good thing is that the TODA replica headers are the same as the original. same bend and same length of inlet and outlet. they tend to go for about $250. know one person who really has gone to the extend of comparing the original and replica and hasnt found a difference in it and just loves the replica the same as the original.

Do u know where I can find one?

night_wolf

12-01-2009, 10:14 PM

ur in melb yeah?! go down to box hill ward while motors. speak to Graham. hes running the same headers mentioned above on his track car. he should be able to hook you up cause he told me if i ever needed one to come see him. say matthew red dc2 with s2k seats recommened you come see him.

CTR_EK9

12-01-2009, 10:31 PM

ur in melb yeah?! go down to box hill ward while motors. speak to Graham. hes running the same headers mentioned above on his track car. he should be able to hook you up cause he told me if i ever needed one to come see him. say matthew red dc2 with s2k seats recommened you come see him.

Hey thanks, will go to see him tomorrow

cheers

night_wolf

14-01-2009, 04:39 AM

what news on the headers yo?

taman

14-01-2009, 08:59 AM

B18C can only be JDM type r motor, sorry didnt make myself clear

it doesn't have to be a Type R motor ;)

cymax

14-01-2009, 09:18 AM

Find Adrian from Toda Performance. He offers packages.... Speak to him to see if he can give you any good deals.

http://www.ozhonda.com/forum/forumdisplay.php?f=69

However if you are on budget, you can consider getting xforce... :)

CTR_EK9

14-01-2009, 04:12 PM

what news on the headers yo?

Called Graham on tuesday, he only have the repilca TODA 4-1 header, he said he'll call me back regarding about the TODA 4-2-1 but never heard anything back from him yet....

CTR_EK9

14-01-2009, 04:12 PM

Find Adrian from Toda Performance. He offers packages.... Speak to him to see if he can give you any good deals.

http://www.ozhonda.com/forum/forumdisplay.php?f=69

However if you are on budget, you can consider getting xforce... :)

Will speak to Adrian shortly about TODA header

thanks

dsp26

14-01-2009, 06:58 PM

Do u know where I can find one?

on top of what he said since you have a B18c i'm assuming you have the factory 4-1 as well which are already worth just under your price range...

everything else in your price range won't be much better than your jdm 4-1s especially for $800... may as well sell em and get the toda's

zropts

14-01-2009, 08:08 PM

yeah... toda 4-2-1 ftw :D

CTR_EK9

14-01-2009, 09:54 PM

yeah... toda 4-2-1 ftw :D

haha yeah, I'll just come and steal your header when your not home :P

night_wolf

15-01-2009, 02:29 PM

yea well did tell you its the replica he has and its just as good as the real deal. call him up again.

zropts

15-01-2009, 02:32 PM

yeah if you can get the replica for that price and performs the same, why not?

You can then dyno and let us know of the results...!

moo moo nel

15-01-2009, 08:31 PM

tri-y replica is good too

Slaz

15-01-2009, 08:42 PM

Called Graham on tuesday, he only have the repilca TODA 4-1 header, he said he'll call me back regarding about the TODA 4-2-1 but never heard anything back from him yet....

Pretty sure Toda never produced a 4-1 B series header apart from SPL's, so like to know what that header has been copied from??

fatboyz39

15-01-2009, 08:44 PM

tri-y headers will do the job.

hisoka

15-01-2009, 10:34 PM

buy second hand brand name headers from a importer, you can get it sometimes for 800ish, ive seen fujitsubo ones go for that much.

taking a short cut at the start will probably be the long way in the end

CTR_EK9

16-01-2009, 02:36 PM

Saving up for TODA 4-2-1 header....

delsol9000rpms

17-01-2009, 12:16 AM

good decision.. quality everybody knows it

GSi_PSi

17-01-2009, 12:56 AM

ive been borrowing my cousins toda power 4-2-1 extractors and it really puts my old custom made ones to shame. So the replica has similar gains to the real deal? Wherebouts in sydney can i go to grab these?

night_wolf

17-01-2009, 05:46 AM

i belive the guy i was refearing to gets them from somewhere in queensland. could find out for you. actually its identical gains compared to the real deal. dont ask me how but thats what he said. his cars been tuned and his car is just made for track use ONLY. so i guess he knows what hes talking about.