PDA

View Full Version : D16Y4 ignitor part number.


nd55
14-01-2009, 09:40 PM
Anyone know the part number of the ignitor/ignition control module in the D16Y4 GLi/CXi EK civic.

A Bosch/NEC/Hitachi number would be great.

Nick.
ECU-MAN
16-01-2009, 08:16 AM
Call your loacl honda delaler and ask them
nd55
16-01-2009, 03:11 PM
> Call your local honda delaler and ask them

Been there.

They have Honda Part numbers only.

They also said the ignitor is not available. Have to buy a whole dizzy.

I'm after the Bosch/Hitachi number or whoever actually make the ignitor.

Nick.
nd55
19-01-2009, 02:20 PM
Honda part number is either
30100-PP2-004 or 30100-PC2-004.

TEC distributor.

I think I wrote it down incorrectly. I belong in 3rd grade by my writing.

A TD-80U does not fit.
It bolts up, but the electrical connector is different.

Any comments?

Nick.
nd55
19-01-2009, 02:27 PM
These Hitachi D4T94-05 dizzies look like the connector is right.

http://cgi.ebay.com/ebaymotors/1996-2000-Honda-Civic-1-6-Hitachi-NEW-Distributor_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q 7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1 Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQh ashZitem370144439081QQitemZ370144439081QQptZMotors Q5fCarQ5fTruckQ5fPartsQ5fAccessories


This hitachi pizzy claims to use the same part number but is clear different.

http://cgi.ebay.com/ebaymotors/1996-2000-HONDA-CIVIC-1-6L-REB-HITACHI-DISTRIBUTOR_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q 2el1116QQitemZ190184874879QQptZMotorsQ5fCarQ5fTruc kQ5fPartsQ5fAccessories

Grrr, Damn you Honda.

Nick.
ECU-MAN
20-01-2009, 08:03 AM
the ICM's might be the same,

Ill have a look in a EK1 Dizzy I have tonight and let you know,

has your ICM failed ??
JasonGilholme
20-01-2009, 08:29 AM
what code is on the housing of your distributor?

If you wanna look up all the different codes with pictures of the appropriate housings/plugs go to www.distributorking.com. i've been lookin for a new TD81U distributor for my b16 | OBD2 engine and these were the only place that were able to show me correct pictures/part numbers etc.

Even if you're not going to buy from there, you may be able to match up pics to help you along the way.
nd55
20-01-2009, 11:59 AM
> has your ICM failed ??

I believe so.

Sourcing the correct new parts without paying a arm and a leg is an issue.

> go to www.distributorking.com.

Yes, I'm aware of these guys.
Any body want to comment on the quality?

> Ill have a look in a EK1 Dizzy I have tonight and let you know,

The Aus. GLi/CXi spec dizzy has a unique ignitor. The connector, ignitor and optical trigger are all integrated in the one case.

This means its not bolt in compatible with anything else.


Nick.
JasonGilholme
20-01-2009, 12:33 PM
what code is on the housing of your dizzy.

Distributor king quality seems to be ok. I'm buying from them right now.
nd55
27-02-2009, 11:20 AM
> what code is on the housing of your dizzy.

Couldn't find any identification on dizzy.



I have a Hitachi HT04 / D4T94-05 (Distributor King) in my hands and it looks perfect.


Will fit it tonight under the moon light with a gentle breeze blowing....

awwww... what a romantic Friday night....... not.

Nick.
dogcrapau
09-04-2014, 01:58 PM
sorry to redig this thread but what is the cast number for the distributor i am in need to replace mine for the exact same car.
is it TD80U?