PDA

View Full Version : DC2 & DC2-R OEM brake pad part numbers


dynosaur
17-01-2009, 09:58 AM
Hi every1,

I would like to get the OEM part numbers of these brake pads. Any1 can tell me? Thanks alots :D

DC2-R (Front)brake pads :
DC2-R (Rear)brake pads :

DC2 VTiR (Front) brake pads :
DC2 VTiR (Rear) brake :
F.O.B Squad
17-01-2009, 10:33 AM
DC2-R (Front)brake pads :45022ST7R02
DC2-R (Rear)brake pads :43022SV4G22

DC2 VTiR (Front) brake pads :45022ST7406
DC2 VTiR (Rear) brake :43022SR030

Hope that helps.
dynosaur
18-01-2009, 09:29 AM
1st I have to make it clear first. My car is JDM DC2-R (96 Spec)


some1 told me the

DC2-R (Rear): 43022-SV4-A00 (for nissin 9CLP-14S caliper)

DC2 VTiR (Front): 45022-S04-V10 or 45022-S04-V01 (for nissin 16CL-14VN caliper)
DC2 VTiR (Rear): 43022-SR3-010 (for nissin 7CLP-13S caliper)

these part number really make me confused :((
F.O.B Squad
18-01-2009, 09:32 AM
So its the 4 stud spec (4x114.3) ITR? Just to clarify.
EG CIVIC
18-01-2009, 02:54 PM
So its the 4 stud spec (4x114.3) ITR? Just to clarify.

96 spec JDM ITR is 4x114.3
dynosaur
18-01-2009, 03:48 PM
yes, 114.3x4. But the PCD is not the main issue in this topic :)

I am looking for the part numbers :)
90LAN
18-01-2009, 03:51 PM
im pretty sure 96 spec is the same size as dc2 vtir size
dynosaur
18-01-2009, 04:08 PM
im pretty sure 96 spec is the same size as dc2 vtir size

front or rear ?
90LAN
18-01-2009, 04:09 PM
front or rear ?

both they are the same size as vtir just 4x114(96spec)
i had a set compared them to my eg6 ones exactly the same size
dynosaur
18-01-2009, 07:49 PM
just now i went out to check my Rear caliper, I found out my caliper is 7CLP13S.

so what part number of the (Rear)brake pads I should get?
dynosaur
18-01-2009, 07:50 PM
both they are the same size as vtir just 4x114
i had a set compared them to my eg6 ones exactly the same size

huh!? VTiR PCD is 114.3x4? I though it was 100x4.... some1 can verify it ?

thanks :)
90LAN
18-01-2009, 07:57 PM
huh!? VTiR PCD is 114.3x4? I though it was 100x4.... some1 can verify it ?

thanks :)

vtir is 4x100 and dc2r 96 is 4x114

what i said before previously
dynosaur
18-01-2009, 08:02 PM
vtir is 4x100 and dc2r 96 is 4x114

what i said before previously

so what is the part number ?
90LAN
18-01-2009, 08:06 PM
so what is the part number ?

u dont need a part no just common sense

so its the same as a dc2 vtir

so what u do is go into honda and ask for brake pads to suit a dc2 vtir

front and rear

or u could take your old brake pads in and get them to check to see it they are the same

i hope i made that easy for u
dynosaur
18-01-2009, 08:13 PM
yeah, but i get it from another guy(cheaper price), which he ask me what part number of those brake pads. :).....
90LAN
18-01-2009, 08:14 PM
yeah, but i get it from another guy(cheaper price), which he ask me what part number of those brake pads. :).....

let me make it simple again for u

once u go into honda and get a number u can get a print out of what the part no's are

very simple
then u can go to your mate and get off him with the no's in hand
F.O.B Squad
18-01-2009, 08:20 PM
OP: Dude just ring Honda and ask them yourself.
dynosaur
18-01-2009, 09:40 PM
let me make it simple again for u

once u go into honda and get a number u can get a print out of what the part no's are

very simple
then u can go to your mate and get off him with the no's in hand

ok I will try, thanks for that :thumbsup:
dynosaur
18-01-2009, 09:41 PM
OP: Dude just ring Honda and ask them yourself.

Thanks for the part numbers :)