PDA

View Full Version : Headlight and FUSE problem!!!!!!!!



s2_eternity_s2
17-01-2009, 08:45 PM
hey guyz! i'm having fuse and headlight problem here.. needs some help!

Okay, i was leaving my house last night when a strange man was waving and calling when I was about to leave. So i wind down the window and said 'wassup?'
he said my parker lights is not on - I was like F*ckkkk...! Lucki i stopped by him else the cop is ready to chuck me a fine!

Today i checked my car to see what's the problem - parker light fuse blew! It blew so it means some wires are zap some where.
So to test if the problem caused by the headlight or the tailight, I unplugged both front headlights, replaced new fuse and turned on the lights. Tail parker light is on. So the headlight is the problem.

End up the only problem is the right headlight. If the right headlight is plugged then the new fuse will blow. Weird thing is when the right headlight is unplugged all parker lights works so I guess with this aftermarket headlight the parker light and headlight are run in different wires.

so what is the problem? All headlight wires are checked. None are touching each other. Have absolutely no idea what is the problem here. Plz help!

OMG.JAI xD
17-01-2009, 09:07 PM
if you wired up the halos to the same wires as your OEM parkers, you might need to use a bigger rating fuse.
your halos might b taking more power than the OEM parkers.


headlight and parkers use 2 different connectors.
you cant connect your halos to the same wire as your headlights.

s2_eternity_s2
18-01-2009, 08:02 AM
I have used this angel eyes head lights for 6-months now not that i just connected it. How come it just suddenly happened?

I read the other thread with similar situation they said it to do with the dimmer switch? Could this be it? Or i just need to replace with bigger rating fuse eg 10amp?

OMG.JAI xD
18-01-2009, 08:35 AM
id try bigger fuse first.

but youve had it in for 6 months.
there has to be a short some where.

if it still blows with a slightly bigger fuse then youd have to check wiring.

s2_eternity_s2
18-01-2009, 06:35 PM
yea i tried with bigger fuse.. and all work fine now except for 1 of my angeleyes ring. either it blown with my 4th 7.5amp fuse i tried or blown with 10amp fuse that im currently using. Just gotta get another bulbs again... hopefully it doesnt blow again with 10amp fuse. At least the problem with fuse is fixed. Thanks OMG.JAI....