View Full Version : Air Intake Help
I got myself a blitz sonic power filter something is not right :confused: :
http://www.coresupreme.com/modules/coppermine/albums/userpics/10020/normal_IMG_1325.JPG
See the red hose that’s from the filter to the engine does it matter if it is kinked or slightly blocked while driving???
What’s the worse that could happen, I will get it fixed so the hose doesn’t bend but still trying think how, any ideas let me know..
Thanks in Adv.
sesshoumaru
19-10-2004, 01:34 AM
why dont you cut it so its shorter
aznsiko
19-10-2004, 01:43 AM
dude that red hose aint right.. u shud cut it make it shorter as earlier suggested man.. it cuttin off inake to another part of ur engine dude..
The tubing looks like itz for oil blowby to me....
dr180
19-10-2004, 08:37 AM
are you sure you got the kit for the right car as i dont think blitz would design something that far off
Boost
19-10-2004, 09:14 AM
the red hose is called a breather hose... it allows fresh air to circulate around the engine block.... and out through the pcv... important to allow air flow. so ensure its not kinked..
yeah its the right kit... Thanks guyz
Psyklops
19-10-2004, 09:40 PM
*idea*...if you know the internal diameter of the red hose, go and get a plastic elbow with the outside diameter being very slightly larger than the ID of the hose...this will ensure a nice tight fit......should be ok then...you will just have to cut the hose at the kink, and fit the elbow inline...best easy fix for this IMO :)
flyhonda
20-10-2004, 11:50 PM
where did u pick that up from? how much? thanks
z3lda
21-10-2004, 12:50 PM
just replace the hose, where the engine is with one of those little cute mini airfilter
where did u pick that up from? how much? thanks
ive seen these sorta small elbow/adaptors on stands in places like supercheap/autobarn, they are the same ones used to plumb up window washers under the bonnet.
should have th right size there. :)
they are like $2.00 i think.
VTEC16
21-10-2004, 01:44 PM
the red hose is called a breather hose... it allows fresh air to circulate around the engine block.... and out through the pcv... important to allow air flow. so ensure its not kinked..
Unless im mistaken - It is recirculating the oil vapours (not fresh air) into the intake ....which then burns of the oil in the combustion cycle. It is a polution control thing.
geo41e
21-10-2004, 02:06 PM
yeah..if i were u..i'd block the hole on the intake pipe...and either getta small oil filter breather, or an oil catch can which is better if u like thrashing ur car round corners alot.
yeah I wanna get a catch can soon, but for the time been i slapped a little brass elbow in im sure it will heat up but what the hey its only temp.
I will record the sound of the pod when its idle, it sounds like a dam vacum cleaner :p
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.