PDA

View Full Version : Question about springs...



DD2
29-01-2009, 04:57 PM
I was wondering....

If someone were to use a spring designed for a lighter car on one that is heavier. Will this cause any damage to the springs?

MRGRIM
29-01-2009, 07:50 PM
shouldnt ..alll it should do is make it lower and a bit less bouncy

old ford n holdens used to do this as a cheap way to lower the front use 6cyl
springs in v8 car

55EXX
29-01-2009, 08:29 PM
don't you mean 6cyl spring in a v8. just more sag and softer spring rate that the only down side. good to run teg rear spring and eg fronts ;)

DD2
01-02-2009, 10:34 AM
Another quick question about springs.

Does the 88-91 model Civic share the same springs as the 92-95?

If this is true, would aftermarket springs also share the same properties?

Djbinh
04-02-2009, 10:29 AM
cut the springs

trism
04-02-2009, 12:35 PM
Another quick question about springs.

Does the 88-91 model Civic share the same springs as the 92-95?

If this is true, would aftermarket springs also share the same properties?


yes



cut the springs

no