PDA

View Full Version : How much for k24 conversion


MWAKU
31-01-2009, 06:08 PM
NAH JOKES
---------------
Seriously though, heres the situation

i have 15" OEM wheels all around, and i swapped the little space saver wheel with an 16" OEM wheel which i had lying around (my old set of rims). Now, would there be any problems, if i run into misfortune, and i have to chuck on the 16" and the spare wheel? So i'd be driving 3 wheels 15" and 1 wheel 16". Where originally, the other 3 wheels would be bigger, and the space saver smaller. But in this case, 3 wheels would be smaller then the 1 spare wheel.
vinnY
31-01-2009, 06:17 PM
plug the tyre specs into a tyre calculator (http://www.miata.net/garage/tirecalc.html) and see what the difference is yourself
SHOGUNOVDDRK
31-01-2009, 06:34 PM
Micheal it should be ok if its temporary...

If a cop pulls you over just show them the blown tyre
95civic
31-01-2009, 06:41 PM
Hey man a K24 convesion isnt even possible! - It would cost like mega bucs IF it could be done.
geeang
31-01-2009, 07:51 PM
Hey man a K24 convesion isnt even possible! - It would cost like mega bucs IF it could be done.

Have you been living in a hole or something? K24 conversions have been done for YEARS. Search up user "EG5" to see one of the cleanest examples in Ozland.
SHOGUNOVDDRK
31-01-2009, 07:54 PM
*palm face*

I believe the term he was using is called Sarcasm....
defect
31-01-2009, 08:04 PM
as long as rolling diametre is the same. it should be fine.
95civic
31-01-2009, 10:37 PM
*palm face*

I believe the term he was using is called Sarcasm....

bahahahaa got it in one!