Fluids for Servicing B-Series

[mrwillz]

Just a question, may have been covered before.

I'm just going to start gathering all the parts for a haulout service of all fluids.

From experience how much L/Bottles are required to service a B16a2. eg flushing out brake fluids etc

Engine Oil (amount/bottles)
Power Steering (amount/bottles)
Clutch Fluid (amount/bottles)
Transmission Fluid (amount/bottles)
Coolant (amount/bottles)
Brake (amount/bottles)

Other series of engines can be added as it may be helpful for others.

[destrukshn]

Engine Oil (amount/bottles) 3.5litres if i can remember
Power Steering (amount/bottles) 1l is usually enough
Clutch Fluid (amount/bottles) refer to brake fluid below
Transmission Fluid (amount/bottles) manual about 2 litres, auto close to 3 i believe
Coolant (amount/bottles) can use up to 5 litres depending how you flush it.
Brake (amount/bottles) 1l can do clutch and brake.

[kriZy]

Engine Oil (amount/bottles) - 4L including fuel filter.

[Limbo]

yeah i have to agree with Destruksn
Coolant i only use about 3 ltrs. I flush with water about 3 times and then let it out.

Engine oil is about 3.5-4ltrs, i can't rem exactly cos i got an oil cooler