PDA

View Full Version : Could anyone tell me what this actuator is from?.


nugget666
02-02-2009, 04:44 PM
I orderd a part for my EK civic sedan but got this in the mail :S. not from my model thats for sure


http://img246.imageshack.us/img246/1088/photo0289xa1.jpg



This is what i pulled from my door was screwed on the oposite way to that one :s.



http://img158.imageshack.us/img158/6693/dooracuatorcc2.jpg
ECU-MAN
03-02-2009, 01:05 PM
have you tried to install the entire lock mechanism
onlykillzz
03-02-2009, 01:07 PM
central locking...... it looks like dc2 but not shore....
SuiJin
03-02-2009, 01:08 PM
what you got looks like from a jdm version.
nugget666
03-02-2009, 04:23 PM
have you tried to install the entire lock mechanism

I have not tryed to fit it, i had a glance but it dosnt look like my rods will suit that setup.
ECU-MAN
04-02-2009, 08:25 AM
OK.

have you considered mounting a non genuine actuator to the Rod,

All you have to do is mount the actuator ( properly ) and then cut off the connector from the old actuator and fit it to the new aftermarket Actuator.

works a charm. the fun part is finding the right wires, but thats not that hard to do.