Audm itr speed/rpm.

[lil_foy]

Hi guys,

I recently bought a clutch and I thought I may aswell change the gearbox over when I have the car apart to save some hassle.

I was just wondering, what are the fd specs on a audm itr box and sitting at 100kph what rpm will be sitting at in 5th gear?

Regards,
Andrew

[lil_foy]

Anyone?
Come on guys, not hard to tell me what rpm you sit at on 100kph in 5th.

[DLO01]

I think I am sitting on 3500rpm at 100kph, or is it at 110kph? I am not sure. Either way it is over 3000rpm at 100kph.

[midnightdood]

3400 rpm in 5th ?

*need a 6th*

[xtercii]

yep it's around 3500rpm...

[dsp26]

http://www.ozhonda.com/forum/showthread.php?t=35200
http://www.ozhonda.com/forum/showthread.php?t=94653&highlight=gear+ratio

[delsol9000rpms]

heres the mfactory gear calculaor aswell.. type you exact tyre size in and final drive etc.. and it will tell yu what rpm you will sit at ...at 100kmph

[Q_ball]

about 3500 on 100km/hr, and about 3700 at 110km/hr

[teaseR]

3300-3400... tested today on the highway

[rayb3na_]

why does it vary so much =O

[teaseR]

everyone is stating "around" or "about"...
im positive thats around 3300-3400...
under 3500 for sure!

[Gio]

LOL fark thats high, dc2's need a 6th fo sho.

[markoJEK1]

4.4 FD , 3400 @ 100kmh

[lil_foy]

Yeah my stock vtir box sits me at about 3200-3300 at 100kph.
They are quite high, eh I dont care. I want lsd.

[90LAN]

its actually 3500-3800 at 100km
if your idle is set correct to 900rpm
depending on what set up u have

[lil_foy]

Thanks lan :)
You're a champ.

Oem idle for mine once its warmed up is around 700-800rpm.

[delsol9000rpms]

Well you must also take into account that your needles on both your speedo and tacho might be out...

On the MFactory gear calculator, with a small diametre tyre (tyres play a major role aswell) it says 3400rpm. Im guessing with a bigger tyre you could get it abit lower...


There is no point saying it IS EXACTLY this rpm... Every car will be different.. It will be better to say roughly this rpms etc.. My guess is that most tachos will say around 3400-3700rpms, however it will be more like 3300rpm-3600rpm

What does the idle have to do with it 90LAN?

[dsp26]

and wheel/tyre rolling diameter too...

[90LAN]

Well you must also take into account that your needles on both your speedo and tacho might be out...

On the MFactory gear calculator, with a small diametre tyre (tyres play a major role aswell) it says 3400rpm. Im guessing with a bigger tyre you could get it abit lower...


There is no point saying it IS EXACTLY this rpm... Every car will be different.. It will be better to say roughly this rpms etc.. My guess is that most tachos will say around 3400-3700rpms, however it will be more like 3300rpm-3600rpm

What does the idle have to do with it 90LAN?


because i let to have it spot on where honda wants it to sit
just the correct starting point thats all

[delsol9000rpms]

like but its irrelevant to what the rpm will sit at on at 100km..

i was just asking that all