Cutting into EG Hatch front bar for Fog Lights

[tiksie]

I don't know if anyone has actual photos, but I'm just after some fitment options for foggies as I will be cutting into my car to fit them (obviously, it's not a EG6 :(.. That will come soon when I'm in Japan).

So just any photos and methods of how you guys did it and how you mounted it.

Thanks guys!

[tiksie]

Anyone /?

[BluEG]

Pull the front bar off and look behind where they are mounted.
There will be a line where you should cut :D

[hisoka]

its pretty tough to do for weaklings lol~ like me. you need something pretty tough to cut with aswell

[B18cEG]

If you can get ur hands on an air saw and compressor that is the best thing to use,
Good luck

[mikeey]

i used just a hack-saw blade... then the second time i used my mates jigsaw (made life easy).
There are outlines of where to cut, then fit foggies and see if they sit properly. If not, cut some more.

[DvS-]

I don't know if anyone has actual photos, but I'm just after some fitment options for foggies as I will be cutting into my car to fit them (obviously, it's not a EG6 :(.. That will come soon when I'm in Japan).

So just any photos and methods of how you guys did it and how you mounted it.

Thanks guys!

http://www.hondaautomotiveparts.com/instal/aii/pages/civic/1995/16603_01.html

[javer81]

i hope these links will help in your installation. gl.

http://www.teknotik.com/jdmrides/forum/showthread.php?t=3015&highlight=fog+lights
http://clubeg6.com/forum/viewtopic.php?t=2859

[Boban]

Might be going off topic, but anyone know what these fog lights came off of? Looks like a e36 bmw foglights but i'm not too sure

http://img88.imageshack.us/img88/6095/frntqtrjv3.jpg (http://imageshack.us)

[tiksie]

Link no workie tam :(

Thanks for info guys!

[DvS-]

works for me.. :s
ill link the image here anyway..

http://www.hondaautomotiveparts.com/instal/aii/civic/1995/oxx_16603_13.gif

[Terryfying]

using a hacksaw blade would be the easiest option as its better control and always to remember cutting abit less is always better then cutting out more as there is no going back if u do that and there goes your bumper..with the 3dr foggies you usually cut out the whole of those 2 sections next to the center grill.mounting should be easy as there should be mounts for foglights in the oem bumper and the foggies you get should have mounting position for the screws which should line up with the holes on your bumper and walla!screw the foggies in and done.... its alot easier then it sounds!