motor

[jdm18c]

hi guys new to this forum, just a question im curious about
i currently have a b16a2 in my eg.. got the whole conversion done... what other parts would i need and what things would i have to change so i could run it in a ek??

[night_wolf]

well basically you would need the same set up as a EK4 would be a good idea to have the same setup.

Engine conversion = loom, ecu and exhast can be used in your conversion.
body wise some renforcement would be would just for handling purposes and chasis strength sway bars and struts would do just fine along with coilovers thats if you want to go nuts on mountain runs or track. i would definetely upgrade rotors, calipers, brake booster & MC, propotional valve (not really sure if ek and ek4 would run the same ones or ek4 would be bigger, correct me if im wrong).

[VTec1987]

u would need
EK4 rear bracket
EK4 passenger side bracket
EK4 wiring loom
EK4 power steering pump
P2t ecu from EK4 or u can use the exisitng computer on ur eg but u require a obd2a to obd1 converions harness

[VTec1987]

Ek4 and Gli EK1 front brakes are the same
Ek4 got abs
and Cxi brakes and rotor are smaller

[95civic]

I think you need to change the gear stick...

[VTec1987]

I think you need to change the gear stick...

You mean the shift linkage?

you can use the same shift linkage, all b series shift linkage is the same

[95civic]

No i mean the thing on the top... the gear stick..