DC2r Seat alternative ?

[midnightdood]

Hello,

Just wondering if anyone knows of a bolt in seat alternative (say from a crx etc ?) which i could swap in and out - in place of the DC2r seats. I do like the DC2r seats - but i feel that its earns its keep - only when the car is being driven hard.

Thanks

J.

p/s: if anyone knows why my avatar isnt showing up - i'd appreciate the heads up.

[simonnowis]

alternatives are stock teg seats using teg rails, otherwise eg seats with eg rails.
they are bolt all straight bolt on/off.

your avatar isnt showing up as you didnt put it either correct format and/or correct size.

[midnightdood]

thanks for the heads up!

I appreciate the info. Didnt know that the seats could be swapped between vti-r and type r. (read something (elsewhere) to the contrary). Being swappable makes life a whole lot easier.

Cheers.

[cymax]

Not to forget about EG. Just remember that most of the parts between DC2R,DC2 and EG are inter swappable.

[midnightdood]

Thanks cymax,

Do you know if CRX (del sol) seats can be used in a DC2r ? - straight swap (without cutting) etc ?


Not to forget about EG. Just remember that most of the parts between DC2R,DC2 and EG are inter swappable.

[cymax]

I'm not sure about this. Apparently, they can't be used on DC2R.

[midnightdood]

Cool.

Thanks for the info. Might be time to start combing some of the wreckers.

[jords]

the rails are diff

[EG CIVIC]

s2000 seats - you'll need to swap the seat pan base of the dc2/eg seats onto the s2000 seats

[midnightdood]

Oooh those would be nice!

*thanks - i didnt think of those* I\'m guessing expensive if even possible to find.


s2000 seats - you\'ll need to swap the seat pan base of the dc2/eg seats onto the s2000 seats

[phwoaaa]

ek seat rails fit with some slight modification

for driver side - lower left hole needs to be drilled bigger
passenger side - lower right hole needs to be drilled bigger

1min job really!

[hiru]

s2000 seats - you'll need to swap the seat pan base of the dc2/eg seats onto the s2000 seats

is this difficult to do? i'm looking at putting some s2000 seats into my dc2...

cheers in advance