PDA

View Full Version : Help : Civic Hatch CXI Power Window Conversion


circuit_DC5
06-02-2009, 04:03 PM
hello, i purchased a set of OEM gli power window conversion parts, which include:

-left and right hand side Power Window Motors
-left and right Door Harness
-Complete loom inside cabin floor pan.
-complete door trims with oem switches

i have ripped out all the old looms and plug all the new looms in etc. and installed all the motors and door harnesses, but there is no power feeding into the power window switches. i have double checked all the connections etc and yet still no power.

just wanna know if anyone on this site has done this conversion before and would like to answer some questions.

if you have ever done this please let me know asap as my car is sitting in the garage with no windows lol.

cheers
Zdster
06-02-2009, 04:24 PM
Are you getting power to any of the other cabin components? Did you splice the harness or just plug it all in? Have you tested the harness with a voltmeter?
Zdster
06-02-2009, 04:28 PM
Have a look through this link as well as may give us some idea of something you might have missed:
http://repo.jackmoves.com/v/erik/album106/album206/
circuit_DC5
06-02-2009, 04:30 PM
Are you getting power to any of the other cabin components? Did you splice the harness or just plug it all in? Have you tested the harness with a voltmeter?

Yeah i still get power to the rear taillights and whatever the floor harness connects to. Splice? no i just plugged it all in lol. i dont have use to a voltmeter


Have a look through this link as well as may give us some idea of something you might have missed:
http://repo.jackmoves.com/v/erik/album106/album206/

You're a legend. i just need that power window rely and three 20amp fuses woooo .:thumbsup:
Zdster
06-02-2009, 06:06 PM
Yeah i still get power to the rear taillights and whatever the floor harness connects to. Splice? no i just plugged it all in lol. i dont have use to a voltmeter



You're a legend. i just need that power window rely and three 20amp fuses woooo .:thumbsup:

Ah, you missed the relay. That would make sense.
flipfire
07-02-2009, 10:06 AM
How much did it cost you overall for the conversion?
circuit_DC5
08-02-2009, 12:27 PM
200 for all the oem conversion parts.
and i installed everything myself. should of did a diy but cbf. seriously, i dont think its worth the hassle. lol might aswell just go buy a gli.

but, if your really keen and hands on type of person then surely give this a go. just remember, it's a big job, prolly take u all day. lol
turtle187
08-02-2009, 11:18 PM
hmm mind me asking where u bought the parts from?
i need to that to my cxi?