View Full Version : help
ingram
20-10-2004, 10:11 PM
has any one played around with an msd sci and im also after some info in turboing a d16y4 engine is there any thing i should look out for.
oil pressure: just above the oil filter! its a screw fitting with a wire or 2 comming out the back of it
ingram
21-10-2004, 12:04 AM
hey thanks heaps
ECU-MAN
21-10-2004, 08:33 PM
there will be a bolt about 1/4 way in from the left of the back seat, between the bottom and back support. undo it then move the metal tab forwards and pull up and out the seat. DO NOT pull the bottom up from the ends ( the front of the seat )
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.