[CU2] K24Z3 on CU2

[denot]

Hi guys,

dunno if anyone has discuss this before but...

Any1 has any link to an explanation on how K24Z3 works on CU2 compare to CL9? what are the diff, when vtec kicks in, etc?

Thanks heaps...

Denot

[integral90]

CL9 had k24a3, not k24z3. Slight differences, probably the biggest would be the integrated header into the block, also different cams.

The k24z3 gearbox also has much nicer ratios compared to the CL9 box which bogs hard into 2nd.

[tony1234]

Hi guys,

dunno if anyone has discuss this before but...

Any1 has any link to an explanation on how K24Z3 works on CU2 compare to CL9? what are the diff, when vtec kicks in, etc?

Thanks heaps...

Denot
Vtec point on CL9 is 6k.CU2 5K.CU2 Cam profiles are a bit different.Power is more linear than CL9. has 8kw more and10nm.more than CL9.CU2 has shorter final drive than CL9.That's all i know.Others please feel free to add to this list.:)

[denot]

thanks for info guys... too bad temple of vtec hasnt release one article like they did with the K20Z of FD2... that was a good read!

edit: found another good read for the TSX K24Z3: http://www.vtec.net/articles/view-article?article_id=755732&thread_style=simple&page_number=1