Log in

View Full Version : JDM B16A OEM Header to 2.5" Exhaust


Lukezen27
13-02-2009, 03:31 PM
Hey Guys

If I sell my small turbo I might have to run N/A till I can afford a bigger turbo..

Is there an easy way to connect my B16A header to my current 2.5" exhaust System?

Thanks

Luke
fatboyz39
13-02-2009, 04:34 PM
take to exhaust shop and chop and weld.
Lukezen27
13-02-2009, 07:17 PM
take to exhaust shop and chop and weld.

Hey Jimmy

Its only for a short time though lol
vinnY
13-02-2009, 10:52 PM
surely they won't charge an arm and a leg to chop and weld one flange?
Lukezen27
14-02-2009, 01:03 AM
surely they won't charge an arm and a leg to chop and weld one flange?

I doubt it but I have to get it there first lol
vinnY
14-02-2009, 01:05 AM
cable tie it in place for now? :p
Lukezen27
14-02-2009, 01:17 AM
cable tie it in place for now? :p

That's the plan hahah
rayb3na_
14-02-2009, 11:18 AM
kinda really dodgy dont use a cable tie you'll melt the thing.. if ur really desperate.. use a coat hanger like.. unwind it and yeah just bend it so it puts it in place? temporary though..
tuyen
14-02-2009, 12:33 PM
get it towed to the exhaust shop. getting a defect notice for having a leaking exhaust (extremely loud when there is a exhaust leak..) might not be worth it :)
Lukezen27
14-02-2009, 12:57 PM
get it towed to the exhaust shop. getting a defect notice for having a leaking exhaust (extremely loud when there is a exhaust leak..) might not be worth it :)

Bah

I've spent close to $300 in towing thus far
fatboyz39
14-02-2009, 04:44 PM
im sure from ben's place it wont cost to much to a local exhaust shop. Take it down to performance exhaust.
Lukezen27
14-02-2009, 04:48 PM
im sure from ben's place it wont cost to much to a local exhaust shop. Take it down to performance exhaust.

Yeah its going to Harken once I'm up and running
lookingforboost
16-02-2009, 10:04 PM
just drive it with the headers on till you get to the exhaust place :P
vinnY
16-02-2009, 10:09 PM
manly to westmead with open headers is a bit much
i did it from granville is morning peak hour traffic, got a few weird stares that morning
Lukezen27
17-02-2009, 07:31 AM
manly to westmead with open headers is a bit much
i did it from granville is morning peak our traffic, got a few weird stares that morning

Na cans in Ryde :thumbsup:


just drive it with the headers on till you get to the exhaust place :P


That's the plan Ryan :)
lookingforboost
17-02-2009, 10:29 PM
oh yeah......:p :thumbsup: