EK1.6LCIV
24-02-2009, 09:21 PM
MFactory Adapter Plate
http://i224.photobucket.com/albums/dd127/kwelrap/DSCF4020.jpg
Product Description:
CNC Machined from billet aluminum, the MFactory Oil Adaptor is the perfect solution for those installing aftermarket oil temperature/oil pressure gauges as well as oil lines.
- 3 x 1/8 point sensor holes
- Fits most Honda blocks/filters
it was installed on my D16Y8 with no problems reading a cold idle of 50psi and 70-75 revving it a bit, then down to 25psi on warm idle going back into the garage
the only tools required are:
thread tape
1-1/16th socket piece
1/2" ratchet
imperial small spanner for 1/8" blinds
plus an oil press and or temp gauge
very easy to install, solid build, def must have if you want an easy way to read oil press/temp :D
http://i224.photobucket.com/albums/dd127/kwelrap/DSCF4020.jpg
Product Description:
CNC Machined from billet aluminum, the MFactory Oil Adaptor is the perfect solution for those installing aftermarket oil temperature/oil pressure gauges as well as oil lines.
- 3 x 1/8 point sensor holes
- Fits most Honda blocks/filters
it was installed on my D16Y8 with no problems reading a cold idle of 50psi and 70-75 revving it a bit, then down to 25psi on warm idle going back into the garage
the only tools required are:
thread tape
1-1/16th socket piece
1/2" ratchet
imperial small spanner for 1/8" blinds
plus an oil press and or temp gauge
very easy to install, solid build, def must have if you want an easy way to read oil press/temp :D