PDA

View Full Version : b18c civic



[[d a n n y]]
10-11-2003, 11:55 PM
has any1 tranplated a b18c in a civic b4?

can u tell me the details if u had?

TODA AU
11-11-2003, 06:29 AM
Have done, yes...
Quite straight forward...
EK4 is the easiest...
Pasenger side engine mount.
The half that attaches to the block is the only important E/M difference...
With EG's you're better off with a front cut...

mo
11-11-2003, 08:56 AM
what about ITR front cut into an EG civic?

Tofu
11-11-2003, 09:15 AM
i know it's not that hard to put a b16 into the eg civic
would the b18c be something similar?

wynode
11-11-2003, 10:01 AM
OB on these forums has a B18C in his EG Vti.

ah789454
11-11-2003, 11:22 AM
to get a better understanding of the b16a and b18c. the difference size wise is that the b18c is 7mm taller than the b16a

EG5
11-11-2003, 12:14 PM
what about ITR front cut into an EG civic?

yes they will fit , just swap the engine mounts , use iTR shift linkage , iTR driveshaft , etc

it doesnt need engine mounts fabrication like if u gonna drop in h22a into an EG civic.

do some research from www.honda-tech.com

mo
11-11-2003, 01:33 PM
thanks mate!!

bennjamin
11-11-2003, 02:00 PM
get back to work Yonas :P

OB
11-11-2003, 04:37 PM
yes they will fit , just swap the engine mounts , use iTR shift linkage , iTR driveshaft , etc

it doesnt need engine mounts fabrication like if u gonna drop in h22a into an EG civic.

do some research from www.honda-tech.com

same deal as the b18c outta the vti-r..... but for u danny.. more involved coz ure breeze is carby and your rear brakes are drums.. cost me $7000 for the full conversion into my si, for u may be closer to $10000, EFi fuel tank.. rear brakes.. are just a few of the additional conversion bits you'll need for the conversion..!!

[[d a n n y]]
11-11-2003, 05:50 PM
hahaha stuff that anywayz ob u got a civic manual ?

the workshop 1's?

OB
12-11-2003, 06:23 PM
no i dont.. yeah the prices can get a bit steep..!! :?

[[d a n n y]]
13-11-2003, 02:16 PM
then how did ya do urs?

can u gib me tips for the EG breeze conversion ?

PM ME PLz

for the b16a