PDA

View Full Version : my cars reving too high..


rfah
23-10-2004, 07:50 PM
when im in neutral my car reving at 2000...i found it a bti wired so i turned my car off for a while..turned it bak on went up to 3000..den down to 1000..den up to 2000...den goin bak n fourth between 1000 and 2000...can sumone tell me whats wrong with my car..=(
2ds
23-10-2004, 08:56 PM
um, not an expert on this but it sounds like either one of your sensors are faulty or your engine isn't grounded correctly.

someone will come along and elucidate shortly i imagine.

-2ds
gambate
23-10-2004, 09:14 PM
u should reset the ECU 1st and see if the problem goes away or not.
ECU-MAN
23-10-2004, 11:06 PM
Eacv
ACTI0NMAN-1
23-10-2004, 11:24 PM
could be a faulty O2 sensor
Weq
24-10-2004, 01:43 PM
iacv or fatv. if dc3r's have fatv's, thats it!
tinkerbell
24-10-2004, 03:51 PM
coudl also be faulty Throttle Position Sensor...

did this just 'start' recently or has it been like this for ages?

do you have a check engine light on your dash???
rfah
24-10-2004, 07:48 PM
it just started like this the other day out of nowhere...and no, no engine light turns on...
[XsCaPe]
25-10-2004, 01:05 PM
im having exactly the same problem

ive changed plugs, oil & oil filter, and cleaned the IACV - twice.

still cant seem to resolve the issue.. have to pull ecu codes one day soon or just bite the bullet and take it to a honda specialist.
Weq
25-10-2004, 08:28 PM
Fast Idle Thermo Valve i tells ya
ECU-MAN
25-10-2004, 09:36 PM
']im having exactly the same problem

ive changed plugs, oil & oil filter, and cleaned the IACV - twice.

still cant seem to resolve the issue.. have to pull ecu codes one day soon or just bite the bullet and take it to a honda specialist.

try to get your hands on a known good EACV from the same modle to test, then invest in a new one if it prooves to be faulty.
Jnr_Mint
26-10-2004, 09:20 AM
a similar thing happened to me...i reset the ECU....and put injector cleaner in my tank....(i think that what it was called)... now its revs just under 1000rpm
[XsCaPe]
26-10-2004, 09:37 AM
Fast Idle Thermo Valve i tells ya

where is that?.. and is it cleanable / cheap / easy to replace?

i'll try injector cleaner ARGH

and another question.. do u guys think that a IACV from a d16y will be the same as the b18c??.. looks very similar
Weq
26-10-2004, 11:41 AM
http://www.honda-tech.com/zerothread?id=699787

search iavc on honda-tech also and u will get instructions
z3lda
27-10-2004, 02:40 PM
fvfvg
tinkerbell
27-10-2004, 02:42 PM
so you have a vacuum leak?