[cu2] how to remove interior trim and covers

[furythree]

please refer to http://www.ozhonda.com/forum/showthread.php?t=108180
for background info

hi, a serious post this time guys,

since alot of you only own Cl7/9s the trim is a bit different to the CU2, but i believe the fundamental design and how theyre joined is the same anyway.

but does anyone know how i can safely and correctly remove the trim around the ciggarette lighter to access the 12v power cable?

alternatively, how to remove that cover below the steering wheel, the one thats right above your feet over your pedals, (usually the thing you see ppl pull off, when trying to hotwire a car in movies or something) *edit* foot well
in the CU2 theres this small dim blue light there that lights up ur foot area, for the passenger as well. it also exists near the sunglass box on the roof. and its brightness is supposedly connected to the dash's lighting.

i was thinking of drawing power from that light's power cable. but i dunno how to remove the cover to get to it.

[Type R Positive]

in the CU2 theres this small dim blue light there that lights up ur foot area, for the passenger as well. it also exists near the sunglass box on the roof. and its brightness is supposedly connected to the dash's lighting.It is! I found out how to dim the dash lights the other night, just turn the odo stem button on the cluster! Much better for night driving! :thumbsup:

[HunterZero]

Please tell us you're not going to add LED dashboard lights...

Will you use this information for good, not evil?

- HZ

[furythree]

read the linked thread? ive been trying to add neon lighting in the foot area.

*edit* no sorry, i lied im going install LED Mugen power signs and charge my AUtobot vehicle so it can transform, what do you think? -_-

[furythree]

It is! I found out how to dim the dash lights the other night, just turn the odo stem button on the cluster! Much better for night driving! :thumbsup:

how bright can it go? sorry i dont want to go all the way to the garage to check lol
too lazy

[Type R Positive]

how bright can it go? sorry i dont want to go all the way to the garage to check lol
too lazy
Something you just have to try for yourself.
Should be set on max brightness anyway.

[furythree]

lol fair enough.

um so back on topic...does anyone now how to remove the covers above the foot well? (yeh i finally found the correct term for this lol)

[corn_flakes]

how bright can it go? sorry i dont want to go all the way to the garage to check lol
too lazy

:(

you wonder why ppl give u sh!t in your vinyls/decals thread.

people offer you help and it just feels like.....*sigh* *shakes head in disappointment*



which visual aid would help you better see how bright the lights can go:

1. doing it yourself in real life and seeing it what it's really like, or
2. having Type R Positive use TEXT to describe it to you?

[furythree]

how has anyone given me help yet before i even posted that line.

i dont see the point of ur post?
can u not create hostility in yet another thread?

2. a text description would be enough
like "not much brighter than its default"
"dazzling bright"
"as bright as interior lights when u open door"

something like that would suffice. im not exactly in a hurry to find out.
so wtf is wrong with something simple like that?

and why are you even posting that here

fk sake, say something constructive

[corn_flakes]

douche....bag....

[furythree]

right, nice comeback
i answered ur question, so u have nothing to say. so dont say anything

clearly you dont know what thread hijacking is

[corn_flakes]

um...douchebag??? :confused:

[furythree]

one word vocabulary

[EUR003act]

:(

you wonder why ppl give u sh!t in your vinyls/decals thread.

people offer you help and it just feels like.....*sigh* *shakes head in disappointment*



which visual aid would help you better see how bright the lights can go:

1. doing it yourself in real life and seeing it what it's really like, or
2. having Type R Positive use TEXT to describe it to you?

LMAO! agreed!! :thumbsup:

seriously, you want help to remove your interior panelling, and when typeR +ve starts helping, you ask him to put in the extra effort of telling you how bright the interior lights go because you cant be bothered walking 15m?

are you fat?

do you have a picture of yourself?

that would probably help alot of us on here understand why your 'the way you are'

as for removing the panels, im gonna be really nice and tell you...

in the footwell, look circular caps/lids around the edges of the panels, remove these, and theyll either be a screw or a clip you just pull out...

some of the panels will have ledges which interlock with the panels around it, make sure as you slide/lift the panels out you dont snap these off...

[furythree]

i just wanted a verbal description. was in no hurry to find out thats all?

thanks for the tip. ill have a look when its a bit brighter out. mozzies everywhere

[stephen8512]

i just wanted a verbal description. was in no hurry to find out thats all?

you always seem to have an excuse for everything...i feel sorry for ur gf if u even have one...

[Crapdaz]

LMAO! agreed!! :thumbsup:

seriously, you want help to remove your interior panelling, and when typeR +ve starts helping, you ask him to put in the extra effort of telling you how bright the interior lights go because you cant be bothered walking 15m?

are you fat?

do you have a picture of yourself?

that would probably help alot of us on here understand why your 'the way you are'

as for removing the panels, im gonna be really nice and tell you...

in the footwell, look circular caps/lids around the edges of the panels, remove these, and theyll either be a screw or a clip you just pull out...

some of the panels will have ledges which interlock with the panels around it, make sure as you slide/lift the panels out you dont snap these off...
hey justin,

don't the panels start from the top similiar to the CL9?
or am i wrong....?

[EUR003act]

hey justin,

don't the panels start from the top similiar to the CL9?
or am i wrong....?

depends which panelling your trying to get off...

for the footwell/centre console ones, they start at the bottom...

if you wanna gett behind the radio/climate control, then yes the top panel comes off first, then the bottom, then the middle....

lol :thumbsup:

[Crapdaz]

thanks,

hate the cu2 imo anyhow...and diff to the CL9 can just start ripping out from the top hahah.

[furythree]

you always seem to have an excuse for everything...i feel sorry for ur gf if u even have one...

its called a clarification not an excuse. excuse is when u try to give reason for doing something. im not giving a reason, im clarifying what i meant clearly, so he doesnt have to go

"1. do it urself
2. verbal desc. etc"
or watever it was he said

i dont really see someone not understanding what i meant, as needing an excuse.

wats my gf got to do with dismantling the footwell panels or lighting? (which btw wasnt even quoted from this thread originally)
dont u have anything better to do than spam quotations of me and making technical comments or "thoughts"? i shud start charging royalties. doesnt this forum have any rules regarding spam



and i havent had a chance to try it yet. uni just started. finished at 8pm. hectic day

[stephen8512]

hahahahahahahahahaha....so you clarified clearly about the stickers being satire in your initial post on that other thread did you?
I do have things to do, but its so rare that I get to come across such an apocalyptic imbecile like you that says one thing and then another, contradicting yourself time and time again that its quite humorous. ur a walking joke mate...

but hey, i'm gonna let all that go and im gonna be the bigger man here from here on in and just observe from afar....if i have constructive contributions to make, i'll make them.

[racerwannabe]

Another thread destined to be doomed...

Mods, pls close before this turns into WWIII...jks

[furythree]

Another thread destined to be doomed...

Mods, pls close before this turns into WWIII...jks

i dont see why i have to have my thread closed cause some goon thinks hes top shit for hijacking a thread, insulting the op for an issue from ANOTHER thread that he already previously said "this is the last post i make" regarding that matter (as if its a big deal that hes not posting), then calls the op self contradicting when hes the one that says he has better things to do, but still makes a post anyway. then after hijacking the thread, openly announces that hes a "bigger man" and that his posts are "constructive".
this thread is about how to remove interior trim and covers. everything he's said has been "constructive"

this is the same guy who lectures ppl on how to be mature, and the ally of justice when it comes to being morally and technically correct. and the guy who knows best how to please and be respectful to my parents whom he doesnt even know.



hahahahahahahahahaha....so you clarified clearly about the stickers being satire in your initial post on that other thread did you?
I do have things to do, but its so rare that I get to come across such an apocalyptic imbecile like you that says one thing and then another, contradicting yourself time and time again that its quite humorous. ur a walking joke mate...

but hey, i'm gonna let all that go and im gonna be the bigger man here from here on in and just observe from afar....if i have constructive contributions to make, i'll make them.

im not even gunna bother replying to this, simply because i dont want to hear from you again. even though u started the hostilities first

[felixd]

Woot !!! another WAR about to begin .......

[stephen8512]

if u check that thread, I said "this is the last post I make in this thread". lol it's alright furythree don't cry...

as for your precious interior, try removing the cigarette lighter ash tray and look for any screws....undo them with a screwdriver and if you need to, use the back end of a teaspoon to pry out the panels making sure that they're still not bolstered to the car (i.e making sure u unscrewed everything). interiors of hondas have plenty of clips so it shouldnt be too hard to pry them
if you're still worried and if you dont want to muscle it..., call an electrician to do it and pay him money to do it right the first time round

[Crapdaz]

ROFL stephen im sure fury will love for you to do it for him..... :p

[corn_flakes]

so has anyone found out how to remove the interior trim and covers yet? :)

[HunterZero]

I'm waiting for the thread, "My interior trim rattles, what do I do?"

- HZ

[Type R Positive]

I'm waiting for the thread, "My interior trim rattles, what do I do?"

- HZROFL! :p

[Crapdaz]

what are trims and what are covers?

explain to me what a life is, i don't have one.

[Joystick]

I'm waiting for the thread, "My interior trim rattles, what do I do?"

- HZ

Giggles! :D

[furythree]

I'm waiting for the thread, "My interior trim rattles, what do I do?"

- HZ

lol
hopefully it wont come to that

wait till monday! when my leds and EL wire arrive. yay!
in the meantime im gunna install my illegal LED valve caps mwahaha

[Crapdaz]

lol
hopefully it wont come to that

wait till monday! when my leds and EL wire arrive. yay!
in the meantime im gunna install my illegal LED valve caps mwahaha
curious on how they are wired up without being tangled up when wheel spins.
got pics of them?

[corn_flakes]

^ i think they use those tiny button cell batteries, and only light up when the wheel is moving.

i think it's another tacky thing he's adding to his car...but to each their own.

[tony1234]

^ i think they use those tiny button cell batteries, and only light up when the wheel is moving.

i think it's another tacky thing he's adding to his car...but to each their own.
RICE.:thumbdwn:

[BE.10.WU]

Damn dude.. you should bought a lancer to put all this shit on!

Coulda saved $15k then maybe you coulda paid someone to do it properly!

[denot]

Damn dude.. you should bought a lancer to put all this shit on!

Coulda saved $15k then maybe you coulda paid someone to do it properly!


Lancer? I think magna ralliart is more suitable for furry 1st car ;)

[HunterZero]

Next come the exhaust whistles, that make the car sound like it's from the Jetsons.

A riced-up hatchback went past me one day with those on, I nearly died laughing!

- HZ

[Type R Positive]

Next come the exhaust whistles, that make the car sound like it's from the Jetsons.

A riced-up hatchback went past me one day with those on, I nearly died laughing!

- HZ
Bubb Rubb FTW! ROFPMSL!!! :p
http://www.youtube.com/watch?v=0x_PyLw_xp8&feature=related

[Crapdaz]

NOOOOOO we need holes punched through the bottom of the chassis so we can fred flinstone style it..... scream to your top of your lungs "VTEC KICKED IN YO"

[tron07]

how about adding a "supercharger"

http://img.tomshardware.com/us/2004/06/15/fighting_fan_noise_pollution/cpu-fan2.jpg

[furythree]

^ i think they use those tiny button cell batteries, and only light up when the wheel is moving.

i think it's another tacky thing he's adding to his car...but to each their own.

lol yeh button cell powered. only activate while driving.
remove valve caps from tires and put these on.

so easily removeable
very illegal so i only put em on in empty streets at night to take fotos. been really busy so havent tried it yet.

[BE.10.WU]

lol yeh button cell powered. only activate while driving.
remove valve caps from tires and put these on.

so easily removeable
very illegal so i only put em on in empty streets at night to take fotos. been really busy so havent tried it yet.

Your kidding aren't you?

No one would pull over in a quiet street, get out and take off their valve caps to put poxy light-up ones on, Would they?

Gee i hope you are not for real!