[DIY REQUEST] Taking FRONT ED sedan BUMPER OFF.

[jdmEG5]

As title said guys, since im having trouble to do so.


thank youuu

[kcokla]

1- get under the car, there are probably 3 screws left right and centre, unscrew those
2- where eth bumper meets the fender, and in the wheel arch, it is probably screwd with a nut or a cross head there on each side, undo those,
3- lift up the bonnet and there shuold be around 5 screws, probably cross heads

presto!

hope it helps,
off the top of my head too and according to what i think will be logical

[jdmEG5]

thanks :D but dont i needto take out the panel filler right above the bumper? i heard the screws for that is under the headlights, and one of the headlight's screw is just under the panel. LOL do you have any pictures?

[Henessaayyy]

You dont need to take out the panel filler, that was a mistake I made and it took way longer than it needed.

You need to look for 4 bolts, 2 on the left, 2 on the right.
Sit infront of your car and look/reach through the mouth part of the front bumper.
You will find them there.

They are the only 4 bolts you need to undo as it will allow you to remove the whole front bumper. Dont forget to remove the screws on the insides of the wheel arch :)

Best of luck :D

[tiksie]

If it's anything like a EG, you have to take the splash guards off each wheel arch and it should be 10mm nuts. then 5 phillips heads between the headlights, and 3 10mm nuts under the bar.

[jdmEG5]

hmmm yeah i know about the EG one, EG ones are easy lol, i just dont know hot to take the front ED bumper lol
thanks heaps anyway guys :D

[SIP117]

didn't u do it back then?

[jdmEG5]

snapped ur panel in the inner side if u didnt know lol

[Henessaayyy]

Did you read what I said? Because it's the way to do it.

[na-118]

maybe they dont want to do it your way,

[Henessaayyy]

there really isnt any other way to do it...

[jdmEG5]

Lol i got it, took it out :D thanks heaps henessaayyy :D though it wud be easier with pictures but its alright i coped with it :D

[Henessaayyy]

Did you do it the way I said?
It's difficult to explain it in words, but I hope you ended up finding it all.

[jdmEG5]

yeah i did, took me a while lol. WIth the help of my brother, he was able to figure things out detailed-ly. but also with ur help, i got to know where about the screws, this and that are. Thanks heaps

[Henessaayyy]

Awesome :) Not too hard, is it :)
Bah, if you were local (which you probably are) I coulda given you a hand.
PS, would appreciate + Rep ;)

[jdmEG5]

LOL not really :L my bro did most of the stuff, i just showed him the comment you gave me here and he was like * lost face * and he went downstairs with me and just mucked around with the bumper and eventually he got it off haha thanks

Rep given :)

[Henessaayyy]

Haha, damn, was hoping i was more helpful than that :P

[jdmEG5]

dw you are ;)