PDA

View Full Version : 12v accessory plug



Djbinh
15-03-2009, 05:00 PM
Can any one describe for me the best way to get into the back of the console where the 12v accessory plug is located? In my s2000 this plug is right at my right elbow and must have so for the previous owner because it has been knocked loose in its mount. It rattles and using it is problematic since it moves back and forth in its mount. Worse fear it that wires will break loose and short out, causing, at the minimum, a blown fuse.

AusS2000
16-03-2009, 09:47 PM
Remove panel behind seat and screw in back of glove box.

Remove centre console and two screws at base of glovebox.

Then snake your hand in behind glovebox and manually tighten Power Socket.