PDA

View Full Version : Removing the whole dashboard in EK



Mooks79
16-03-2009, 02:27 AM
Hii there, Anybody knows how to remove the whold Dashboard in the EK??
especially near the AC ventilator, trying to pull it out its so hard is there any hidden screws??

Slaz
16-03-2009, 08:52 AM
Its a fiddly job and if your not careful, you will break clips and trim, if your not confident then try and get someone who has to help, or be prepared to pay to replace the parts you do break.

You just have to be careful and supportive of the plastic trim and trying to remove it, the piece i think your referring to in the centre with all your heater controls is just clipped in, but underneath where the lighter is and so on, contains screws, some hidden at the back of the tray and so on, if something doesnt come without much effort, then look fir screws or where its tight first as you've probably left soemthing in that your about to rip out or break.

Hope that helps.

XP02ED
16-03-2009, 08:55 AM
theres 2 10mm bolts on the engine firewall which is connected to your AC lines.

also 2 x radiator hoses which needs to be unclipped.

make sure you turn the gas of your AC before unbolting it or youre gna have to re-gass yoru lines.