Please help,1.6 PGM-FI

[petenaylor]

Hi guys,
I'm still having dramas with my Integra. I HAVE researched just about every Post,Thread and other sites to find the answer to my erratic Idle (1200-1500 RPM,warm). I originally had a Code 2 so replaced the O2 sensor fixed that. I have cleaned and adjusted the Fast idle valve, checked all vacuum hoses,cleaned Throttle angle sensor.After all of this my "cold" idle" came down but warm idle still very high. next checked ECU and it gave me a Code 7 which is Throttle Angle sensor,so ,replaced that ,no good.
Does anyone have any other suggestions?

[mozza]

bud did u remove your throttle body and clean inside with carby cleaner, check if the vacuum hoses are fitted to the right place ,also your pcv valve could be the problem

[petenaylor]

Ok...... the Service manual I have is from the First Integration site and the Vacuum diagram looks nothing like mine!! Even the numbers on the hoses were different!! Please excuse my stupidity but I looked all over for the PCV ....WHERE IS IT !!!! Love this car just wish I could sort these little dramas.

[petenaylor]

Oh sorry I did clean the Throttle Body, Fast idle the whole lot. Is there a accurate Vacuum diagram out there any where?