cd5 fog lights

[mr_vti_s]

hi everyone, do you guys know where i can get a good set of fog light for 96 accord? does the one on civic's (between 93-97) will fit on accords? i dont wanna go to honda cause im pretty sure they gonna be so expensive. any ideas? thanks

[Element12]

Hey there,

Foglights were not a OEM product on our ausspec accords unfortunatly :(, we have a slightly different front bar to the JDM ones, we don't have the little tab mounts on the bar for the foglights to screw into but you can always try to cut out that section of the top bit of the bottom lip and find a way to mount them.

I'm actually quite unsure if Honda will supply accord foglights over here i remember asking them about OEM JDM headlights and they said its too much hassle in the end i got them elsewhere, You can try eBay or Accord forums which will be your best bet.

To answer your civic foglight question im not 100% sure about that.

[mr_vti_s]

ahh ok cool, well i saw on ebay like for honda cd5's and its like 200 us dollars so expensive, but im thinking just to get after market one like from autobarn of something.. thanks for the help anyway.. cheers

[Element12]

Yeah, they are super rare for a good kit with all the wiring and what not !

You can put in aftermarket fogs, i don't see why not ! you'll just have to make up custom brackets or work out a way to fit them ?

But, yeah it can all be done with alot of patience and time to sit infront of the car and do it :P

[bumper]

Check out www.ozeparts.com they have some foggies for the CD5's. Should check em out.
Dont know about how good they fit though but they come with a bracket that looks like it would.

[FAT VTI]

cable tie them.

[Element12]

cable tie them.

Racing spec ties :p

http://cgi.ebay.com/ebaymotors/JDM-Honda-Accord-CD7-RARE-FOGLAMP-FOG-LIGHTS-1994-1995_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a16Q 7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQh ashZitem190296835345QQitemZ190296835345QQptZMotors Q5fCarQ5fTruckQ5fPartsQ5fAccessories

Have a look at these, they look like they are from AccessHonda

Just had a quick look for you then.

[040501912]

best! is go to wreckers mate! i got mine last year from them.. for 100 bucks? and make my own switch and getho wiring!..

its direct bolt in ;) no cutting or drilling!

its JDM style yoo! lol..
u be lucky if you get the yellow lense!

[mr_vti_s]

u think hondbits or hontoys got them??

[040501912]

if they have front cut from japan, they should have some.. give it ago! u might find something interesting!

[FAT VTI]

could try just jap maybe.

[Element12]

u think hondbits or hontoys got them??

Yeah, give honbits a ring, they usually have odd bits and pieces like fog lights sitting around, they have more engines than anything though.

[FAT VTI]

honbits is shit house man, it's really no comparison to hontoys...except they are generally better help but in terms of what they have, I find hontoys 60 times better.

[mr_vti_s]

thanks guys for all the help tomorrow im gonna check hontoys if they got some, btw does anyone of bought a sport/racing seat from autobarn? cause im planning to get one

[FAT VTI]

I reckon it would be a pain to fit mate,
considering the auto seat heighten thing in cd5s, i reckon it would be a mission.

[mr_vti_s]

u reckon??? can you just take that seat heighten off n replace wif a after market rails??

[Element12]

You can custom make rails to fit your aftermarket seats, i don't see a problem but i would get it all engineered because you can get slapped with a massive fine and defect for non-engineered aftermarket seats.

[mr_vti_s]

You can custom make rails to fit your aftermarket seats, i don't see a problem but i would get it all engineered because you can get slapped with a massive fine and defect for non-engineered aftermarket seats.

thats a good point element!! btw where can you get engineered rails? where i can get them installed?