rear brakes off early model integra on civic? and injectors?

[lookingforboost]

do the rear brakes off an eary model integra LS do the rear disc brakes off those fit onto a EK civic?

and dose anyone know how many CC the injectors off this model with a B18A model are? and if they fit an EK fuel rail?

and the fuel pump in these suit an EK tank as well?

Thanks

[jdm_b16a]

do the rear brakes off an eary model integra the 88-91 models LS integras do the rear disc brakes off those fit onto a EK civic?

All the parts of the rear trailing arm:

http://www.hondaautomotiveparts.com/auto/jsp/mws/catimgs/13S040_B29.gif

DA Integra LS is 1990-1993. These have the same rear end brake setup re: trailing arm as the equivalent Civic ED (1989-1991 not 1988), just has disc brakes instead of drums. So these are direct swap. You just keep your camber arm (labelled No.3 in the diagram) (don't use the TEG one, its too long). EG/DC may be different so same applies to EK. You'd have to do a direct compare at a wreckers. Certainly the hubs look different but the arms may be the same. Doing a hub swap means using a press. EG/DC/EK are interchangeable.

DC Rear Trailing Arms

http://leelimphotography.com/sale/dc-trailingarm-1.jpg

As well, the 1989-1991 Civic and the 1992-2000 Civic use the same rear shock. The 1988 Civic can use the TEG DC Type R shocks, so if you swap out the lower controller arm on 1989-1991 Civics (and probably up to 2000) you can also use the Type R shock.

Rear Shock comparison

http://www.ef-honda.com/ben/rear_shocks.jpg

Although I haven't been able to answer your first question directly, I hope I've provided some info that might help you sort out your problem.

Peter

[lookingforboost]

thanks its helped me i just saw them and was offered them at a good price so i though i would see if they fit so it would be easier to get a setup off an EG/DC/EK