Finally! New coilovers PHOTO ADDED PAGE1

[ndeuro_]

well after two years. finally lowering my car =] happy everyone? lol just transfered the money to Akina. waiting on him to post the goods tomorrow.

ill keep you guys updated

IT HAS ARRIVED. THANKS AKINA =]
http://img19.imageshack.us/img19/9978/dsc01378e.jpg

[Crapdaz]

better watch out his shady :)

[ndeuro_]

LOL stop scaring me. lol crapdaz hows urs sitting with ur body kit?

[felixd]

:D nice wad brand was it is it tein SS ?

[Crapdaz]

LOL stop scaring me. lol crapdaz hows urs sitting with ur body kit?
mine rofl i can't get into my home driveway so i park at gf's unit visitor carpark.

front = 0.5finger gap and rear= 0finger gap.

Rear camber running -1.5deg each side and toe 0.5mm in
Front camber 0.5deg and toe is fixed to 0.5 or 1mm.


:D nice wad brand was it is it tein SS ?
yesh akina's was tein ss.

[.QD]

I'm surprised you didnt make your own coil-overs :P *don't hate*

You'll be happy with the SS, very comfy... you'll be low enough since your kit fills the gap.

But buying from Akina...... I dont know man...... I wouldnt deal with this Akina guy, like what Crapdaz said he is pretty shady. hehe. j/k.

[akina]

LOL, Thanks for the love guys... I'll return the favour as soon as I have the chance :p

Nate, I'll try my best to put it through tomorrow. Its going to be tight, and I'll message you once I have. As you know, if its not tomorrow then it has to Thursday.

And yea, use the height setting that I was using! Its going to be fully sick with the LuckyStar kit ;)

[ndeuro_]

please tomorrow. ill give u an E-BJ if u do

[TRaNz]

Daz just scare him a bit more and post the pics of you getting stuck around the local servo and shoppo centers....LOL

[Crapdaz]

nah mate don't need to, hahaha
before my luckystar rep kit i got stuck at parramatta driveway anyhow when i was at the current height. (assuming my stock front bar was like 20cm off the ground too)

got stuck where the catalytic converter + resonator is.

But for your sake, the utter pain you feel and the skip of a heart beat when you hear your car go scrrrhhhhh you will want to cry :)

Most of the shopping centres i go to now i can't get in or out without scrapping.
Mainly going upramp is fine so any downramp and exit driveways you might suffer some scrappage.
And if you have the metal jumps in mid ramp then you will die there too :p especially if they are the steelie trapezium shaped ones unless you angle.

dnt cry!

btw what colour is the genuine colour of the luckystar kit base colour when non painted?
if you want i can take my car to a shopping centre and take some photos from ground clearance etc.

[TRaNz]

nah mate don't need to, hahaha
before my luckystar rep kit i got stuck at parramatta driveway anyhow when i was at the current height. (assuming my stock front bar was like 20cm off the ground too)

got stuck where the catalytic converter + resonator is.

But for your sake, the utter pain you feel and the skip of a heart beat when you hear your car go scrrrhhhhh you will want to cry :)

Most of the shopping centres i go to now i can't get in or out without scrapping.
Mainly going upramp is fine so any downramp and exit driveways you might suffer some scrappage.
And if you have the metal jumps in mid ramp then you will die there too :p especially if they are the steelie trapezium shaped ones unless you angle.

dnt cry!

btw what colour is the genuine colour of the luckystar kit base colour when non painted?
if you want i can take my car to a shopping centre and take some photos from ground clearance etc.

Just quoting again for the sake of Nathan to re-read again =]

[Crapdaz]

Zoooooooooommmmmmmmmmmmffffffffffggggg!!!

Watchout nathan!!!

[ndeuro_]

lmao. i didnt know what colour it was. cause workshop did it

[Atjo]

Sample pictures of euro with luckystar. All 4 cars using 19" rims.

http://www.atjo.org/teamagentz/images/past%20members/angkot/03.jpg

http://www.atjo.org/teamagentz/images/past%20members/nhi73m/02.jpg

http://www.atjo.org/teamagentz/images/past%20members/kinto/04.jpg

http://www.atjo.org/teamagentz/images/past%20members/tbr-870/01.jpg

[ndeuro_]

mine'd sit lower cause im 18s

[mrwillz]

o rly
pics please

kinto was gangsta!

[ndeuro_]

dont have them in yet. akina just posted them today. should get it tomorrow

[kongfu]

luckystar kit make euro likes a boat

[r-r-redEuro]

2nd euro with the lucky star kit. looks the best. because he cut off the shark teeth and he shaved and remolded that gap under the headlights

[Crapdaz]

luckystar kit make euro likes a boat
only if you don't dump it and leave it stock height.


2nd euro with the lucky star kit. looks the best. because he cut off the shark teeth and he shaved and remolded that gap under the headlights
yeh it does look cleaner but loses the aggressive look :)

[ndeuro_]

lol just looks like a skyline now

[Crapdaz]

lol just looks like a skyline now
are you drunk? :p

[ndeuro_]

im asian =]

[Crapdaz]

im asian too and im pissed off cause of (so and so) got jipped...

nice teins man!

[akina]

w000t! They look better then when I sent them! lol

Good stuff man, I'm glad your happy.

And DON'T reuse my spring compressors (even tho I threw them in there)! lol

[niiCk]

how much did you sell it for if you dont mind me asking?

[ndeuro_]

1.25k posted :D bargain! LOVE YOU ALEX MUAH

[niiCk]

damn thats cheap! go put them in! lol

[ndeuro_]

i will tomorrow prlly. if my camber kit comes in =]

[ndeuro_]

PHOTOS ADDED TOTHIS THReAD

http://www.ozhonda.com/forum/showthread.php?t=110213

[felixd]

welldone

[sodaz]

And if you have the metal jumps in mid ramp then you will die there too :p especially if they are the steelie trapezium shaped ones unless you angle.


Those speed bumps really aren't compatible with lowered cars and my car really isn't that low compared to some. I've hit my lower arm bar so many times with those it's not funny. Now I go over them at 5km/h.

[Crapdaz]

Those speed bumps really aren't compatible with lowered cars and my car really isn't that low compared to some. I've hit my lower arm bar so many times with those it's not funny. Now I go over them at 5km/h.
Same here my LAB too,
But those will kill his and my kit because our front lip sticks out more than the mugen front bumper or any other kit.

[Accord Basic]

sorry to say that, in my own opinion, all these 4 euro with lucky star kit are urgly. The stock kit much much better.

I am thinking to install a GT wing for my euro. anyone got pic or where I can order? Thanks

[felixd]

sorry to say that, in my own opinion, all these 4 euro with lucky star kit are urgly. The stock kit much much better.

I am thinking to install a GT wing for my euro. anyone got pic or where I can order? Thanks

wad u mean lucky star is a good kit :D rather than u putting the gt wing on euro its ugly LOL

[Accord Basic]

That's y I am asking anyone got pic to have a look. at the moment, I have the Spoon duct tail trunk spolier. look too small. i need something bigger Thanks

[tony1234]

That's y I am asking anyone got pic to have a look. at the moment, I have the Spoon duct tail trunk spolier. look too small. i need something bigger Thanks
I agree with you on luckystar kit,fugly.I'll buy your ducktail spoiler if you get gt spoiler.

[Crapdaz]

That's y I am asking anyone got pic to have a look. at the moment, I have the Spoon duct tail trunk spolier. look too small. i need something bigger Thanks
rofl GT is too riced... and all GT wings are universal; just that you will need to drill through the boot.

[felixd]

That's y I am asking anyone got pic to have a look. at the moment, I have the Spoon duct tail trunk spolier. look too small. i need something bigger Thanks

let me buy it off ya !!!

[Accord Basic]

Hi, I found a second hand spoon spolier only HKD 1000 + shipping.

http://www.supergt.com.hk/sh/sh.php?q=cl9&Submit=Search

I bought some items from them, good service, pls talk to Dennis, he can speak English very well.



I agree with you on luckystar kit,fugly.I'll buy your ducktail spoiler if you get gt spoiler.

[Accord Basic]

http://www.arkspeedracing.com/ProductDetails.asp?ProductCode=ARK4H906

anyone bought anything from ARK speed racing before? where can I get the swift springs?

[felixd]

hmm i cant read it LOL its in chinese

[tony1234]

http://www.arkspeedracing.com/ProductDetails.asp?ProductCode=ARK4H906

anyone bought anything from ARK speed racing before? where can I get the swift springs?
Get the Eibach springs.With the shit exchange rate at the moment plus shipping those will cost you a bomb.

[NDU19E]

how much they set u back?