pistons rods and honing

[mytoycivic]

hello there

sorry to be asking so many questions but i need to know some more things....

what sort of pistons should i get for my D16a8 and will i need rods as well...

i figured that if i was going to do the rings i may as well get the new pistons as well....

i will need the block honed as well yeh?

BTW I DID SEARCH FOR AGES AND COULD NOT FIND WHAT I WANTED OK?

[mytoycivic]

come on people...WHAT PISTONS ARE GOOD? AND WHO HAS THEM?

[Weq]

do u want aftermarket forgies or stock d-series ones from other models??

Rods:
eagle h beams
croswer I beams.
SCAT


pistions:
cheap brand, SRP
good: JE, CP, arias

it all depends on what compression u want also...

[mytoycivic]

well i want stock ones...only so i dont have to change other things
i had a look at arias a while ago but couldnt find anywhere to get them for the D! do you know were weq? where i can get this gear from? and will i need my block honed?
thanks mate

[Weq]

well u will need it honed if u wanna do things properly, but i think u mean boreing. find something made for a stock bore and u are fine.. i think u should learn more about pistons and rods and there benifits before u try picking some out.. search honda-tech for info.
http://www.knology.net/~jediklc/D.htm

notice that ur pistons and rods will effect the displcement and compression of ur engine, also consider this