PDA

View Full Version : Adjustable Endlinks for OEM DC2R rear sway bar/lca set up


tRipitaka
08-04-2009, 10:12 AM
anyone know of any companies who make aftermarket endlinks for the OEM DC2R sway bar to fit OEM LCA's ?

any reviews/opinions ?
nd55
08-04-2009, 02:22 PM
function7
e240
08-04-2009, 02:41 PM
Whiteline
DNYALL
08-04-2009, 06:33 PM
I got function7 adjustable endlinks, havn't installed em yet though. will do it asap :thumbsup:
tRipitaka
08-04-2009, 11:00 PM
i believe the function7 endlinks only fit with the f7 lca's.. (in regards to DC2R.. not sure with EK)

any idea whether the whiteline endlinks work with an oem setup ?
fatboyz39
08-04-2009, 11:42 PM
blox makes rear endlinks.
tRipitaka
09-04-2009, 12:15 AM
blox makes rear endlinks.

i noticed them on ebay..
but they mention that they're designed specifically for the blox rear sway bar ?
97EK1
09-04-2009, 08:10 AM
generally all those blox/F7 endlinks are just adjustable rod ends with males and females put together you can get from any fastener shop really, so just get the correct size. Thats what i did with my ek9 22mm sway and with my F7 Lower Control arms hope it helps with the dc2R one as well.
EG5
09-04-2009, 04:20 PM
all adjustable endlinks are pretty much the same it can be modify to fit both OEM or aftermarket control arms.

you just pay more for quality spherical bearings that last long and won't make noise.
STiR
09-04-2009, 08:16 PM
No problem is bolt size also, swaybar mounting requires smaller diameter bolt if I remember correctly
fatboyz39
14-04-2009, 07:17 PM
i noticed them on ebay..
but they mention that they're designed specifically for the blox rear sway bar ?

Really? Im using them on stock DC2R rear swaybar and been working fine for over 6months.
tRipitaka
14-04-2009, 07:22 PM
Really? Im using them on stock DC2R rear swaybar and been working fine for over 6months.

dunno..
just going by what they say in the product description

http://cgi.ebay.com/ebaymotors/BLOX-ADJUSTABLE-END-LINKS-HONDA-CIVIC-ACURA-INTEGRA-JDM_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 390028389046QQitemZ390028389046QQptZMotorsQ5fCarQ5 fTruckQ5fPartsQ5fAccessories#ht_4868wt_1047

are you running stock dc2r LCA's ?
also, are you using the stock bolts to connect the endlinks to the LCA's ? or are you using the blox bolts ?
fatboyz39
14-04-2009, 07:33 PM
Im running Function 7 LCA. Using custom bolts (mix and match LOL). Ill have a look at it in the next few days and take a pic if you like.