EG rear disc setup help

[mohdmanutd]

Hey guys i just need some help here please with changing my rear brake setup to discs.

I got the complete rear disc brake setup with the handbrake lines and everything and i was just in the middle of the installation when i cencountered a problem. The brake fluid lines from my drum brakes fit into the new disc brakes and screws in but for some reason it leaks brake fluid oil from the joint were the hose and the bolt connects. Hope iv made things clear. If anyone could help me out on what im doing wrong would be appreciate. I dont know if im screwing it the wrong way or there is other parts missing or what things could cancel this leak. Thank you

[bennjamin]

you are missing thee copper washers. You need them either side of the banjo bolt....to seat and seal properly.

[TODA AU]

Ben is probably correct, but...
Do yourself a favour & get someone who knows what they're doing to help you.
It's all good and well to DIY..
Untill you kill yourself or worse, someone else.

[Sir_vtec]

Are you re using the brake fluid lines from your drum set up?

My memory i dont think you can reuse them.

Post a pic to show us where the problem is.

[mohdmanutd]

hey guys i fixed it all up i just needed different brake fluid lines as they are different thats right Sir_vtec

so i got me some other braided brake lines....

thanks soo much guys for the help

[civicVI]

hey guys i fixed it all up i just needed different brake fluid lines as they are different thats right Sir_vtec

so i got me some other braided brake lines....

thanks soo much guys for the help

may i ask whats diff??
size?

[B18cEG]

I went from eg rear drums to integra vti-r rear discs, they fit 100%